console modem on PSAX ATM switch

[pthegreat]

Hi all,

Can't get the modem to work connected to the console port on the CPU. I entered the required AT commands in my USrobotics as the manual indicates. The modem answers, but no login! I'm using the standard console cable with the DB25 connector.

regards,
Peter

 

[Guest_imported]

Did you ever figure it out? I'm having the same problem.

Mr. Mike (am069@torfree.net)

 

[pthegreat]

Yes I did get it to work. Forget the AT commands as in the manual!!!
I used a standard 28.8/33.6 USRobotics, factory default and set the external dip switches as follows :

1 - down Data Terminal ready override
2 - up Verbal Result codes
3 - up Suppress result codes
4 - down No echo offline commands
5 - up Auto answer on first ring
6 - up Carrier detect normal
7 - up Load NVRAM defaults
8 - up Dumb mode

and it works!!

good luck
Peter.