Search results for query: *

HTH, thanks for all your help. I found the problem. The onboard HP NetRaid was enabled on the new mother board. Thats y when SCO was trying to find a disk on controller 0, LUN0 it gave the error no root hd controller was found. I disabled the onboard controller and everything worked fine. Once...

I am booting like number and at the boot prompt I am typing the following defbootstr link=amird Sdsk =amird(0,0,0,0) Should I be booting from the emergency boot disk ???

Hey HTH, I got the string. But I get this message now bootlocore: out of low (below !Mb) memory No memory for string table No (or cannot load ) kernel hd(40)unix link failed symbol talbe

Where can I find the exact syntax for the boot string ???

Folks, Any SCO guru's out there please help me. I have a HP LH4R net server with 4 x 400 MHz CPU's, 3 HP NETRAID 3Si adapters, 1 adaptec controller. When I came in yesterday morning, I saw only a blinking cursor on the server console. I tried tor reboot it and it wouldn't go past the POST...

Can anyone tell me standard procedure to recover a SCO server in the event of a failure ??? I do have a backup of all the filesystems on a DLT.

Rcbatlinux, Each NIC card has a MAC address. Each NIC manufacturing vendor has a specified range of MAC address allocated to it by IEEE. The first three number of the MAC address should be able to tell u who the manufacturer is. Dig on google and u will get what u want . Hope this helps u...

Thanks a lot pal for your input. Both the cards work perfectly fine. I was just curious. I come from Sun Solaris world and I have been handed the task of managing a few SCO servers too.

Does anyone know if SCO allows IRQ sharing. I have a adaptec SCSI card and a Mylex RAID controller on my server. Upon running hw -r pci, I discovered that both these controllers had the same interrupt line. Is this normal ???

Have you confirmed if the sendmail daemon is up and running and accepting connections ??? Telnet to the server running sendmail as follows: telnet < server ip > 25 if you are able to establish a connection means that sendmail daemon is working fine. also check is deliver daemon is running lalaker

Have you confirmed if the sendmail daemon is up and running and accepting connections ??? Telnet to the server running sendmail as follows: telnet < server ip > 25 if you are able to establish a connection means that sendmail daemon is working fine. also check is deliver daemon is running

I have installed a new 3com 3c905b PCI nic card.

Folks, I need help urgently. I am getting these messages in my messages file. For some reason the server performance degrades drastically. (device 1/7/0) WARNING: apic: illegal interrupt line specification for PCI device (device 1/7/0) WARNING: apic: illegal interrupt line...

Folks, I have few of SCO servers and for some reason one of them just becomes slow during the day. There is no fixed time. Can anyone tell me what I can do to check y the system is behaving like this. Also does anyone has a copy of a compilied version of the TOP utility for SCO.