Search results for query: *

:), Well, in the BCN case the ISDN works fine. But in the ARN router case, the Flash Card free space was less than 2mb and the ISDN won't works. The layer1 is active and the call did go throug but not the protocol. After I del some file and compact again the Flash card to 2mb only, then it...

Hai, I have a question regarding BCN router. My customer is using a 8MB v 13.0 Flash Card. Currently the customer free size is less than 1MB (after I have Compact) the Flash Card. I have an AN with 8MB Flash Card and less than 2MB free space and the ISDN protocol/bat do not work. While for...

Hi, This is an error log from an AN router: "Could not obtain files over network, will attempt local boot. Configuration file '1:config' successfully loaded BOOTSTRAP FAILURE: error obtaining boot files Entering diagnostic monitor... AN Diagnostics: Version - 7.34 - Tue Aug...

Thanks, I have a weird problem with the AN router with ISDN card. The ISDN line is up, when the COM 1 is down, but the routing did not work. After I checked, the Flash Card free space is less than 2MB. After moving some old config file, to a PC. I managed to make the Flash Card free space...

Thanks, I will check on the info.

Thanks, We have reboot the both end before but the error are still there. At the C100, we have reload it Image. The problem accured after a power trip that kills the UPS connected to both C100. After that this happend. Thanks again.

hi, I need to find out if AN have ISDN card built in or slot. If yes what is the Part Number or serial number. Thanks

Hi, I need some help both in command and info, on how Nortel configured and support ISDN. I need some command that can be used to verify that a ISDN line or the ISDN config have been configured corretly. I have no exprince in ISDN using Bay. p/s Is there any info on BLN router also...

Hi, 1) If the Nortel Router i.e AN/ARN/ASN or passport have bee install before then the RS must be there. 2) SM normaly have the RS inside it software. 3) Make sure that the SM you are about to used is the same or higer version that the Nortel Router that you have. If the SM is lower, you...

Hai, I am getting error from the Novell Sever AAL Statistic error on this particluar site using Fore Card and connected to a ATM C100. Here is the error: RCV Alloc Failure Largie Bi --> keep incresing Cell Drops VCI Not Connect Cell Drops Vci Out off range A5 PDU CRC Error A5 Congestion...

Rick, Thanks for the info, I tested the faulty Flash Card via rebooting it on a new working ARN router. Then when I try to format back the Flash Card via command Format or Site Manager(boot from a working Flash Card and then hot swap) it won't work. Keep advicing me about no Volume detect...

Hai, Due to Heavy rain and thunderstorm arround my country, a few off my AN and ARN router have been struked by lightning. While the serial port can be repair but the Flash Card file since to be wipe out. When I used a working router and try to see what inside the flash card i was advice that...

Hai, I have a problem with one off my customer running this type off network: 1) Site A is having a 2mb Internet connection Site B is having a 512k Internet connection 2) Both site have it own Firewall and are connected using OSPF with all it bracnh site using Area 0. 3) By wright all...

Hai, I have a very wierd problem with my ASN router, I have upgraded the Flash Card from 8 to 16mb and the Ram from 16 to 24MB. The original router was configured using Site Manger 12, and now I am using Site Manager 15.3. If my ASN router is down due to power trip, then this will happend...

Hai, I am using Images 10 up to 15.3, what I notice is that: a) If the DLCI is configured manualy, all Image will show the DLCI as Active Static (Branch Site), even thou the cir is down. If the DLCI is auto, upon the cir is down, I won't see any, since ni signal from Telco. b) If the HQ is...

Brat, Thanks

Hai, That is the correct way, but be advice :) It may take a few time to get it wright. By the way, can some verify back to me on how to resolved AN password. I rember taken out one jumper from the AN motherbord but have forgoten which one. Thanks

SM is no longer free, I think you have to buy it arround USD 100 from nortel. I have 80 Nortel routers running on various Image starting from 11 up to 15.3. If you have an older ASN the image 12 to 14 should be sufficents, the Image 15.2 is not suitable for a mix enz ( trust me, some thing...

Hai, when you upgrade the C100 from it fomer Image do you: 1) Copy out/save the original config into Speed View 2) Upgrade the C100 using the Cross cable/Console Cable 3) Save the original Image 4) The MCP RAM must be at least 16MB and up Thanks

Hai, I have encounter problem when we bought a new ATM/ethernet Module on C1400 and it don't work due to Image problem. Can any one advice me what is the lattes Image for C1400. Secondly what is the status on Image 5.2. Thanks