Lost password on a ARN router...

[lxholla]

Anyone have any ideas on how to get into an ARN router
that's password has been lost?

I checked Nortel but there wasn't really anything that on it.

Thanks.

 

[lxholla]

Tiremd fixed with previous post - Disregard

 

[BadSyntax]

ARN password removal:
1.Power Cycle the ARN

2.When the ARN starts cycling through Power on Diags, type Cntl-C followed by a carriage return.

This will put you in diagnostics mode and you will see the following prompt
diag_1>>

3. At the prompt, type in the following command exactly as shown below:
d/l/n:5 410000 0

Note The l is a lowercase L
This sequence will blank out the Manager password in NVRAM

4.Type boot or power cycle the ARN

http://www143.nortelnetworks.com/fa...-080020a6f762&resource=&number=5&isExternal=0

 

[977128]

Hai,

That is the correct way, but be advice
It may take a few time to get it wright. By the way, can some verify back to me on how to resolved AN password.

I rember taken out one jumper from the AN motherbord but have forgoten which one.

Thanks

 

[Brat]

Hi, 977128

S16 jumper - to enter AN_DIAG>

Brat

 

[977128]

Brat,

Thanks