Search results for query: *

I initally posted this one under SUN Solaris forum - and thought, this might be the right forum for it. This is about configuring individual disk (under SSE 3310 disk array) and discovering by "format" command running under SUN Solaris 10: sccli> show disk Ch Id Size Speed LD...

I finally got the answer I'm looking for and I thought it's worth sharing to whoever might need it (SE 3K disk array disk 0.9 is defective): sccli> show disk Ch Id Size Speed LD Status IDs Rev...

i got it running, but of raid setup ... i want individual disk to be recognized under "format" # sccli /dev/es/ses1 create logical-drive raid0 0.0,0.3 # sccli /dev/es/ses1 create logical-drive raid0 0.8,0.11 # sccli /dev/es/ses1 show logical-drives sccli: selected device /dev/es/ses1 [SUN...

here's some system info: # uname -a SunOS ABCDE 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V240 # sccli sccli: selected device /dev/es/ses1 [SUN StorEdge 3310 SN#005XXF] sccli> show disks Ch Id Size Speed LD Status IDs Rev...

you can try: # zonecfg -z zoneA zonecfg:zoneA> remove net zonecfg:zoneA> add net zonecfg:zoneA> set physical=bge0 zonecfg:zoneA> set address=xxx.xxx.xxx.xxx zonecfg:zoneA> verify zonecfg:zoneA> commit zonecfg:zoneA> info zonecfg:zoneA> end

lol, Ken.. yup..i think i totally broke it.... Here's what I got.. # devfsadm -c disk # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> /pci@1c,600000/scsi@2/sd@0,0 1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27...

i got this problem of re-discovering the disk array from my solaris sparc box. initial solaris OS install was able to detect it, but - after i tried to break the "raid" config, i lost it totally. i just want to re-connect my c3 (disk array). any feedback is appreciated. thanks. # cfgadm -al...

it's solaris 10 running on a PC (x86) with IDE hard drive.

i got 40gb hard drive. during installation, i opted to only used 20gb. but, during installation of another application, i ended up running out of space. now, i want to carve out space from the unused portion of the disk, e.g., 20gb left of at least 2 gb to be added to the existing 20gb. is it...

thanks. lol... nice ideas. mrn is right. i'm looking for old box that can run aix 6.1 and go from there. thank you aixperts ;)

good one khalidaa.

the frame is being manage remotely. there are SA in the location, but sometimes in a BIG company asking someone to insert a CD/DVD in a drive - is like "you'll have to wait forever", especially if you're just in a testing phase and you're just preparing it for eventual project kick-off that HAS...

was it the system memory region mapped as page segments, but managed separately from base memory of the system?

my limiting factor would be the absence of CD/DVD drive. any idea?

I got same problem before,i've done network boot after successful ping test. it got stucked on the welcome screen. i've checked "spot" resource (allocate/de-allocate). LED display should give a good indication of what's going on, too.

aixperts, in-an-ibm-frame of mostly aix 5.3 servers, i am considering one lpar to run aix 6.1. i got the aix 6.1 install CDs, but my master nim is running 5.3 and i don't have cd/dvd drive on a frame. as i can remember, your master should be higher than your client when considering NIM...

sorry...i should have open a new thread...

aixperts, in-an-ibm-frame of mostly aix 5.3 servers, i am considering one lpar to run aix 6.1. i got the aix 6.1 install CDs, but my master nim is running 5.3 and i don't have cd/dvd drive on a frame. as i can remember, your master should be higher than your client when considering NIM...

A.) "errpt" shows: root pts/0 $ errpt IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION A6DF45AA 0619161307 I O RMCdaemon The daemon is started. 2BFA76F6 0619161207 T S SYSPROC SYSTEM SHUTDOWN BY USER 9DBCFDEE 0619161307 T O errdemon ERROR LOGGING TURNED ON 192AC071...

aixperts, I am trying to setup a PPP cnxn (dial-up), from MS Vista to my AIX 5.3 server. The thing is - I can communicate with my modem but suddenly dropped for unknown reason. Any tips where I can check for possible error? Using "smit ppp", here's my (/dev/tty0) configuration/setup: A.)...