Search results for query: *

How do you program IP trunk on MiVB 9.0 and up. because we're going to migrate to MiVB 10.1 but doesnt get the network IPadress option to fill in under ICP/PBX networking -> IP networking -> Network IP address. One PBX is MiVB 10.1 and the other one is 8.0

but how does MSL know, we've had 2 hardware pbx that was communication on ip trunk but right know we are going to migrate one pbx to virtual to 10.1 and that ip/trunk network adress option has gone

Hi guys, i have a problem in MiVb 10.1 the option Network IP adress doesn't come so i can't fil the ip adress of the ip trunking. ICP/PBX Networking > IP networking > Network IP adress. What other solutions are? i dont see the option network ip adress. i see it on MiVb 8.0

Hi guys i have an ax controller version 9.4 when i access the server manager to upgrade the system i find this error. i've already tried to deactivate the serviclelink then clear hardware-id and activate the servicelink. i can ping https://swdlgw.mitel.com/ from the MiVB. My DNS is ok and i have...

Does 2 diffrent firmware matter?

Hi Guys, I'm just insert a new HD 2 in bay 2 slot, and the HD begin with the mirror proces, i get this following when i insert the redundant status command, everything looks good, but after passing 75% of mirror proces i get the following error that "Source caused rebuild failure." this is the...

Does it get stuck at 60% with this error: Unable to download from thirdparty.firmware.connect.mitelcloud.com? rebooting in 5 minutes You'll need to update the firmware for you're MiVB. See HO4838

I've update the firmware via ftp server. With the help of "KMS Article HO4838

Hi, guys Have you guys encounter this on mitel phone 6920W,I got problem with the firmware. Unable to download from thirdparty.firmware.connect.mitelcloud.com rebooting in 5 minutes Does the W version works with MiVb 8.0 and older?

Thx guys my MiVb is up and running

I'm supposed to get this Determine the active partition number (1 or 4) by accessing the controller through the Maintenance port, and then running the following command: version You will observe the following system response: VxWorks (for Mitel MMC-C PPC83XX F2500) version5.5.2. Kernel: WIND...

With which program do i do that migration? Thx for the help

My Compact flash card 16gb has Mitel MiVoicebusines 9.1 on it, but i keep getting the error when i try to boot: Loading /partitio50...usrFdiskPartLib: warning: invalid partition entry encounte red block 0, entry 1, sys...

Are these boot parameters good? [VxWorks Boot]: p boot device : ata=0,0 unit number : 0 processor number : 0 file name : /partition1/rtc8260 inet on ethernet (e) : 192.168.1.2:ffffff00 gateway inet (g) : 192.168.1.1 user (u) : ftp ftp password...

Do i need to put mi 16GB Mitel compact flash in compact flash 1 or compact flash 2? to install the MiVB

Hi guys, We just bought a Mitel ax controller but im trying to put MiVB on it but don't know how to start can anybody help? I've put a mitel 16GB compact flash card in compact flash 2 but when i see the boot process i got this error: boot device : ata=0,0 unit number : 0...