Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ICP/PBX Networking > IP networking > Network IP adress

Status
Not open for further replies.

Tech guy 297

Technical User
Jan 3, 2024
25
AW
Hi guys, i have a problem in MiVb 10.1 the option Network IP adress doesn't come so i can't fil the ip adress of the ip trunking. ICP/PBX Networking > IP networking > Network IP adress. What other solutions are? i dont see the option network ip adress. i see it on MiVb 8.0
 
but how does MSL know, we've had 2 hardware pbx that was communication on ip trunk but right know we are going to migrate one pbx to virtual to 10.1 and that ip/trunk network adress option has gone
 
all mivbs are added to network elements with their name and Ip address
they should all have a pabx number
on later software
its no longer required to set the ip address against the entries in ip/xnet / ICP/PBX networking
the xnet just uses the pbx number and gets the ip from network elements

If I never did anything I'd never done before , I'd never do anything.....

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top