Search results for query: *

This is the exact stop error message I received 0x00000024 (0x00190203, 0x8a353148, 0xc0000102, 0x00000000) after changing boot sequence to cdrom. I restarted the laptop and ran chkdsk with the recovery console. I then ran chdsk /p to let it run a check on the drive anyway. When it was...

i tried an external monitor, but still nothing (no display). Acer wants $300 for a motherboard. I guess I will be looking for parts elsewhere (purchasing another laptop).

Windows XP won't load..Once it passes the winxp flash screen it shows the blue screen with stop error message..It will not go into safe mode or anything else you choose except the bios..I ran a check on the hard drive & memory which was fine and scanned drive with anti-virus software using the...

When I press the FN (function key) and F5 nothing happens on screen. Therefore it just may be the onboard graphics card that is bad.

Sympology>>>I turned the laptop on using the battery,but got no display on screen. Then I charged the battery and tried again but still no activity on screen. When the laptop is turned on the following lights are lit: power light battery light (if charging) hard drive light

I have charged the laptop and it shows activity from hardrive, but the fan only runs for a few seconds then stops....I removed the battery and memory for a while then replaced it..I still got no image on the display screen. Now I will try options 2 & 3 that you suggested to see if I have any...

My daughter has a Acer 3690-2519..She noticed it was flashing in red letters on the screen (trojan virus) on her laptop. After charging the laptop she noticed it would only stay on for a few seconds then turn off (damaged AC adapter). After getting another AC adapter and charging laptop again...

I have the following components in my pc. G31t-m winxp core duo 2ghz 2gb memory Ide dvd burner 500gb hard drive linksys wireless-g card I installed the mb and linksys drivers. It couldn't locate the drivers for the following...

My old hard drive crashed and I was re-installing xp onto the new drive.

I have a G31t-m motherboard. I tried adding a floppy drive but wasn't successful with connecting the cable to MB. Therefore, I would need to fdisk and format this drive from a cd. How do I go about accomplishing this step by step?

It was a video card I had laying around. I cannot find the drivers to it, so I started searching google for it.

I have a HP 512c using Win xp. The video adapter pins on the motherboard are broken. I've installed a video card, but I need to to locate the driver for it. I've searched in google. Where can I find them? Any suggestions... Matrox 576-05 Rev B Compaq diagram#006444 FCC ID# 7057600...

I installed a new power supply and the board booted up fine. Now I can continue connecting the audio and Front panel. Thanks for all your help..

BadBigBen....I did connect the power supply to additional 4 pins to the left o the cpu as I stated in an earlier post. after doing so there was still no activity to the board. The manual states that the board may not boot using the 20 pin power supply + the additional 4 pin. Now i'm going to...

I can't get this board to boot at all. Therefore, I disconnected the case connectors and tried booting the board (no activity). I'm using a 20pin psu with the additional 4 pin plugged to the left of cpu. Next option would probably be to try purchase a 24 pin power supply.

I have the ECS G31T-M motherboard. I can't get the board to boot. I would like to know what's the correct pins to connect the following case wires to: USB1 USB2 Data+1 Data+2 Data-1 Data-2 VCC1 VCC2 GND1 GND2...

Karmic I stated in the question above that I had a new drive already and the OS was win98. I am using Norton Ghost version 5.1... Firewolfrl thanks for the site. I tried making a image of my drive, but it said not enough space, enable spanning. Dumpfile size 2443 & 162mb available Steps...

I would like to know how do I use Norton ghost step by step how do I use Norton ghost to transfer all my files from my Western Digital 20 gig HD to my new 60gig Maxtor HD. System Specs: win98 AMD 900mhz DVD CDRW 256DDR Does it matter which one of these are Master/Slave when...

Where can I purchase a cd caddy for a scsi hard drive. Also where can I get spare parts for an old Ibm pc.

Try google.com to search for solution