Search results for query: *

Good evening everyone, I have a problem with my SV9500. there is a problem on the line, it has been fixed by my operator. but now when I try to make outgoing calls I see a message on my extension (BSY) and it cuts out. I noticed that when I unplug the cable which leaves from the arrival of the...

Hello everyone, I have a problem with my sv9500 here I have a T2 line with several numbers. the head of line being the switchboard number has been configured, all sets can make outgoing calls by dialing 9 + the number my problem is that I have posted a number specific to him example: set 1 has...

Hi daniel, I also work on this kind spetraclink 8440 on my sv9500 when you put the regulatory domain a: 2 do you activate the radio: 5GHz and 2.4GHz? tried to activate them it should work

Good morning all I still ask for your help. here I would like to make call restrictions for certain extensions, but I really don't know how it works. goal is to be able to block outgoing (national as international on specific positions). any help would be welcome Best Regards , Ludovic

Thank you for yours informations

Thank you yes indeed the SDA is DID, I was able to manage everything

Hello everyone, could someone help me configure my DECT G566d and the AP400s on my NEC SL2100

I copy the config to you

thank you I was able to manage the problem, but how could I assign a line to the station so that it rings directly on this one. e.g: I have 5 DID line and everything rings at the standard (200) I would like to allocate 3 line to 3 different station for q it rings directly on these station and...

to tell the truth, I only have to do the initial configuration. so if you can help me do some configuration

the line arrival of the line is BRI and I had a PRI card. but that I have just changed to a BRI card normally everything should work but my problem is I could not dial an entire number (e.g: when I want to dial 27225228XX I am sorry that it has 3 digits is 272 and it cuts off immediately

ok I try this to see, but tell me the arrival of the line is a BRI (T0) and the card in the SL2100 PBX is a PRI (T2) card will that cause a problem?

This is a new install

Thank you for your answer . I have two lines, for the moment nothing works. Yes the check has been done by the supplier. when you call on the line it rings but not on one of the telephones. it rings in a vacuum, weird thing i have a T0 line, and my card inside the sl2100 is a PRI card (so a T2...

hello everyone, I have a problem with my sl2100, I cannot receive and make outgoing calls on the line. could you help me in this way how to configure

hi, yes that's it I did (IP address assigned in 84-26) it works thank you guys -Conxtel and Kinetix

Thank you, but I believe the US version does not work with me

Ok , yes that what doesn't work

legacy ?

I have both calls between digital telephones that go through. but with digital phones no