Search results for query: *

Changed the RTP Alarm, and unfortunately it hasn't resolved the issue. But thanks for the idea as it is something we hadnt tried before. Back to the drawing board I guess.

Thanks for the tip @DoubleDriveLine, when I got back to my office, I setup an IP phone against my dummy system and found the setting you were talking about in: Press the 'Menu' button near the directional pad in the bottom right of the phone Go to 'Setting' Go to 'User Setting' Go to 'Talk' Go...

Hey Guys, Random one that has reared its ugly head for me to play with. Customer has SV9100, CP20, with DT800 IP phones. Randomly, on incoming calls, staff will answer, and at the start of the call they will hear a beep which can block the customers voice etc from being heard, so it is...

If the system is straight out of the box, you can register the CPU in LMS and activate one of the demo licenses from in there. Even if its not brand new, you can still grab demo licenses from LMS for the life of the system. As for 90-57, this was changed from 90-36 on the 2100, so both program...

I managed to figure it out for anyone that was interested. PGM 270, Table 1 Apply time was unconditional Dialed Digit was 000 Changed Digit was 0000 Apply Option was Station PGM 111 Under Tone / Ring Attributes, Index 9 Apply Table 1 to extensions required. Doing this means that anytime...

Hey Guys, Have had a customer request a change from 0000 (0 for trunk then 000) to be changed so they only need to dial 000 in case of emergency. (000 being for emergency calls in Australia) I have added 000 to the Emergency Code Table in PGM226, I have attempted to do Digit Conversion in...

Hey Guys, Not overly familiar with Mitel, have done the training but this is something a lil more niche. Does anyone know how to set a IP DECT Cordless to diagnostics mode so that we can complete an audit of the DECT system.

OK, in 12-07 setup a third mode, rest of the programming above is still relevant for this, just in a third mode instead of the 2nd. When setting up buttons, you can setup a key that only switches mode 3 on, then their normal day/night switch will switch it back to day. If their lunch is the same...

I have a few grandstream WP825 WiFi phones (not IP DECT) running on a 9100 CP10. I went the easy approach to get this done. PC Pro, Filter Options, IP Phones, Tick box for Port to be turned into IP Phone 15-05 - 16 - Set Auth Password, 18 - IP Duplication Allowed on In Phone, set ServerIP as...

If the system is programmed so that calls come direct to your handset, not a ring group, you can do this easily by from your handset dial 751, push a key you want to program, 10, your voicemail pilot ID. And assuming the rest of the programming in the system is correct, and you have a voicemail...

Have a look in 84-13-28 and also 01, 07, 33, 38 - This is codec and frame sizing you are sending out I would also confirm your Diffserve is setup in 84-10 for RTP/RTCP and SIP Trunk On outgoing calls, it is your system initiating the calls, and as such, sets the precedence for timers and QOS...

Yeah, I would guess the issue is either your system port licensing, or behind the error box you have something other than KCCIS.

@belvedere I am looking at running up handsets on a proprietary third party SIP Server for cloud based SIP. Should be able to get it working, but for some reason I have no ITZ files in the file I downloaded from you for the standard SIP, am I looking for the wrong file?

Using the different modes, you can set incoming calls to route to a virtual extension. Attendant then changes the mode to ring to the VE, and then dials: 790, 1, extension number they want to ring, hold. 790 is cfwd all calls per extension (11-11-52), and allows one extension to change another...

No ITZ files listed at all in the folder.

10-12 3, 9, 13, 14 - Set IP Addresses 84-26 01 - Set IPL DSP Address 10-19 Set No. Of Channels to 'Used for CCIS' Based on Licence 10-68 Setup as for number of Channels, Start Port is next available port. 50-01 Tick On 50-02 09 - set own Point Code. (based on designation of system in...

All Good. Happy to help.

Was anyone able to locate the DT830 files? the "itzisipvg.tgz" "itzisipvg.sig".

In the secondary CPU have you confirmed there are no logins using Session Management? Alternately, give the 2nd CPU a reboot to see if this resolves the error. WebPro will allow you multiple logins

22-02 - Ensure your trunks are set to DID across modes in use 22-09 - Use 7 digit analysis 22-11 - Set your received number 8632500 to either 501 for VRS1, or 102 for InMail and Dial Action Tables in 'Transfer Target 01' 22-11 - Set your received number 8632599 to 2599 in 'Target 1' 22-13 - Set...