Search results for query: *

Hi I have a couple of mobile phones that I would like to connect to our SV9100. We currently use the ST500 app. We have these working internally fine but I also would like to get them to work External as well. I have open a port on my router to allow access for the ST500 to connect via but I...

@Belebedere thanks for your reply. I understand this part but it only does it phone by phone for internal calls to that phone. The UT880 phones don't do different ring tones for Internal/external call like the DT700 phones do. I am trying to find a solution to be able to distinguish between...

System is the SV9100 The phones are UT880's running only SIP

I am wondering if there is a way of changing the colour of the large LED light to flash a different colour depending on the Department call coming in. I currently have the following set up Red - All Internal Call Light Blue - External Calls Wondering if I can have 2 different colours for my 2...

Found out what the problem was. In my NAT routing I was porting the UDP port 10020 to the incorrect internal IP. This was the port that was causing the loss of audio in some of the calls. I have now routed it to the correct IP and all seems to be fine.

@OzzieGeorge We are using a Draytek Vigor 3910. Do you know what ports The NEC uses?

Hi I set up some ARS's up on our system so we don't have the long delay when calling the outside line. The setup i'm using is as below. 26-02 TE Dial Data Service type Addit Data 001 0 F-Route Access 1 (National Number) 002 00 F-Route Access 3 (International Number) 003 999 F-Route Access 11...

Hi I'm having problems with my SV9100 and incoming call. It is not all the time but 2 or 3 phone calls a day we get coming in are silent and I cant work out how to solve this. I have all the ports that my Sip provider has recommended open on my router (locked to their IP's for security) but we...

the Fanvil is set to just receive digit 1 to open the door. no real setting that can be changed. what settings their are i have changed to each type and tested with no response. Its just like the phone is not sending the tones within internal calls.

@OzzieGeorge I have 2 doors to the building and one set of contacts so i do need DTMF to open the other door.

@RlsMe I have tried this setting the phones i'm using are IP Phones. # @daddybadger I can install apps on the device. i would prefer to stay in the phone app to control all door phones. If anyone know of a door phone that does not need DTMF tones to would this would help.

I was wondering if there is a way of making the Sv9100 send DTMF tones on all calls and not just external. I have a Fanvil i10 door intercom that needs DTMF tones to unlock the door. The phones (UT880) i am using do not have a way to enable the DTMF tone all the time. At the moment when i make a...

I managed to find a more simple solutions that works well. 26-02 TE Dial Data Service type Addit Data 001 0 F-Route Access 1 (National Number) 002 00 F-Route Access 3 (International Number) 003 999 F-Route...

Hi All slowly getting our system set up. Just trying to set the ARS up on an SV9100. I have found some cheat files for setting them up but they seem to be designed for the US numbering systems. I was wondering if any one can help me with setting it up for the UK. I have tried a few different...

HI Wondering if anyone in the UK has successfully got an NEC SV9100 (or another model) connected to the Andrews & Arnold's(A&A) SIP Trunk. I have managed to get the calls coming into my PBX but i can not get the system to register on the A&A network. I have use LinPhone on my mobile to connect...

Asked in the past but have had no replys. i was wondering if any one can help. We are just setting up a SV9100 system with UT880 phones but i can't seem to get different ringtone for different calls. I can not find the setting for this in the phone it self. I know the PBX is sending different...

Hi We are just setting up a SV9100 system with UT880 phones but i can't seem to get different ringtone for different calls. I can not find the setting for this in the phone it self. I know the PBX is sending different tones out as i have a couple of DT800 phones attached and i get the...