Search results for query: *

Having issues with digital sets showing on display Personal User Mode, can reset set but the display goes completely blank and set does not work, I can reset system and sets will work properly. any thoughts on what might be happening. Thanks Telcosub

Sorry for the confusion. I started the module first, then started the main cabinet, after the reboot it still will not up load the correct software. Thanks

new ip 500 v2 R11.04.1.0 build 11 adding a dig AdpX16 B2 - in programming it has 10.1.0.0.0 build 237 will no get new load from system all the cards in cabinet have loaded correctly how do you up date the load in the expansion module? Thanks

thanks for the info found problem to be the control unit Thanks again

Thanks I have done that but it will not take the info after i hit set and yes the time server is disabled could there be an issue with the load R-11 11.0.4.1.0 build 11

avaya R-11.0.4 set up with essential - set up 1 user to change time, user rights to level 2, programmed a button as self administer with action as 2. For some reason the programmed extn says set time, I input correct time and date but no change returns to set time. have I missed a step or is it...

Thanks

thanks found problem bad sd card

could this be a bad R 11 sd card?

new system install ip 500 r11 basic setup using as key system but can not get the time and date changed on ext 10 I go to Admin- System Admin- System Parameters- system date try to change and reverts back to old date same with time tab, did not want to add essential license any ideas and...

Sorry, Embedded

Avaya office ip 500 v2 with 9.1 software, I have Did numbers routed to each extn, the ext numbers are the last four digits of the Did's. 4213 is the extn, I also have a call coverage apperance of 8260 on that extn, I need to have the voice mails from 8260 go to 4213 mail box, 8260 has no...

Thanks I will try that tomorrow Thank you

have installed new ip office with 9.1 software has a 12 channel Pri can not do out bound transfers any help ? is there a problem with the new software just installed pri on an 8.0 and there was no problem Thanks

Thanks all will check today

Thanks TTT, I will change tomorrow,

Thanks TTT , the only other choice is intuity mode, if Intuity mode is chosen do you still have to remove the source codes to force the user to use a password?

changed ip office partner mode 8.1 to standard mode, put in license for essential and also installed pri with correct license, all worked well except the embedded voice mail. users need to be forced to use passwords internally removed the source codes to force this but still does not ask user...

need to remove vcm card and replace with 8 port analog card slot 3 is where the replacement will be, will this change all of the ext's in slot 4 this is an ip 500 server edition release 5.o, The vcm card is not needed any more Thanks

thanks I have set the flash timer at every setting and tested but still does not work, when you use the flash key nothing happens you don't even here it change the call or click tried using the hook switch but it just hangs up the call no matter how quick you touch it. looking at the...