Search results for query: *

also you have 8000 series phones there these are very old they have have been superseded by the 9000 range and now you have the 1000 range of phones like the 1030i . surprised your using them on a new ucp100

how many Ip phones do you have . how have you set up program 102 in the system. the system will only come with 30 ip phone linceses by default . if you are getting local no act the phone cannot see the system . plug it in where the other phone is and hit the transfer button a couple of...

what message do you want to actually change? you will need to go to the attendant phone and get the ip address of the system from that . press transfer star then hash . to get into admin . hopefully theirs no password then press transfer dial 101 and you will then be able to see the ip...

@robinsonlaw22 program 105 when you login is where you can change extension numbers i personally delete all the extension numbers from the entire range then only enter than ones i need .

as above what system are you on . some steps to take : can you get to the system gui on the local lan . ? plug a phone directly into the switch where the phone system is plugged in. disconnect everything off that switch apart from the phone system and phone . this will rule out a lan...

turn tls for web off through the admin key set . then retry . that is a very early emg80 and they are on lv 4 software now . it would be worth upgrading it to the latest software . you will need the special upgrade files for this .

if its a new system you shouldnt have a issue . but might be worth checking your tls settings in your internet settings on your computer

turn tls for web off . under system settings. you can do this from the keyset if needed .

yes their are jumpers on the side if i remebr it will come default in sip mode . move jumpers to ipkts mode

you need to go from 5 to 5.5 with a special upgrade file . you can then go to from 5.5 to 6.0 to be honest the mfrim50 is a old unit you cannot get license files for and has stopped bing made what 5 years ago now . it has been replaced with the ucp100 . you are best not wasting your time...

you will need a lcob card yes . these systems havnt been made in a long time . you cannot put a pot line on to a bri card no . so yes programming will be required and a new card .

ouch .

if you email me the back up file i can extract any infor you need

mr jones hows things . im ok dude . just spent the last year building my house lol . feel free to email me on martinhodge@hotmail.com if you wanna catch up

there isnt a default group . it depends on who programms it . your looking for the group whish is programmed as vsf vm etc. so you can go to the groups under the keyset programming and just scroll through them till you find the one or just default teh password like above which would be the...

80 pound a month?

cheers dude .

i know you put output on the 232 port . and im 70 percent sure you can out put on a port on the lan port as well . you just set the tcp port is uses under the smdr settings . this is how its done on the newer systems anyway . what every software you use will just listen on that port . toll...

what was the out come with this. just curious my self .

carl the message you are recording is a system greeting normally recorded for ccr tables and auto attendents can you get on to programming of the system via the web gui if so . look up where the hunt group over flows to and what the voiceail hunt group is . then just simply set a flex key...