fEW QUESTIONS
iS HIPATH EXPERT aCCESS USES JAWA? IF YES WHICH VERSION?
iS IT VULNERABLE TO LOG4j APACHE THREAT?
iF YES WHAT IS THE REMEDY?
IF WE REMOVE THE PROGRAM ACCESS MACHINE FROM INTERNET / LAN, IS IT SUFFICIENTLY PROTECTED AGAINST LOG4J?
ipo 500 V11
ONLY SIP PHONES ON ISDN PRI LINES
INCOMING CALL CANT BE TRANSFERRED ON extension unless the extension answers the call.
the operation manual asks to use NOW key for such transfers, but it returns message "TRANSFER FAILED"
iT ALSO ASKS TO ENABLE THE FEATURE BEFOREHAND, HOW DO I...
We have IPO500 V2R11 installed with 2 ISDN PRI linesAfter activating the PRI the incoming call / outgoing call signalling and receipt etc works fine, however the speech does not happen, there is complete silence on voice channels. The PRI line has been tested with PRI meter, hardware has been...
Dear Friends,
We are facing issues in using Avaya IPO 500 V2R11 central directory from SIP extension programmed in Manual Set UP.
The Phone J139 / J179
how to effect it?
I am trying to set up a meet me conference on Avaya IPO. For external callers it works fine as expected, it greets and asks for the password etc. However for internal Intercom users, i want to restrict participation by "entry by Password"
How do i do it?
ADD-WABE:2500,,,TIE,N,,,,,,,,;
<DEL-WABE:2500,,,TIE,N,,,,,,,,;
M33: VALUE TYPE DOES NOT CORRESPOND TO TYPE IN VALUE TABLE
TYPE = ?
TYPE : DESIRED OPTION
CHARACTERISTIC : REQUIRED CONDITIONAL
POSS. VALUES : DPLN DIAL PLAN /...
We are facing an emergency on one of sites.
There are two PRI working with 2 different Pilot numbers and around 700 MSN numbers.
\incoming and outgoing works fine.
suddenly one of the pilot numbers which was routed on attendant console AC-win, stopped landing.
THEn MSN is virtual number for PABX...
The rack is full for any addition and I need to add 2 x 30 extension modules.
How much max. distance can put these modules from control Modules ( expansion card)
Dear all,
The network cable for AC -Win had broken, was replaced.
On starting the AC -Win, the error returned was
"invalid attendant type: does not match hicom group configuration"
what could be problem?
How can I forward the AC-Win to another extension till this problem is resolved?
We have a IPO office 500V2 R9 Installed with over 100 users.
The intercom speech is excellent for both analog and digital.
There are two analog trunks connected on to the system.
The trunk lines when directly connected on PBT are having excellent speech quality with No Noise, echo or speech...
Ac Win IP in Hipath 4000... on receiving call or dialling out, just restarts.
We tried re-creating workspace, re installing licenses, removing even skype from the PC.
The headset works for other application.
the calls can be received well on alternate extensions though.
any OUT OF THE BOX...
Hipath 4000 v5,
AC win IP restarts as soon as incoming call is attempted to pick or outward call is initiated with a dialing code. But the alternative physical phone works fine.
the machine was restarted, the licenses were checked, the route, packet drop.. all checked.
Please advise. It is...
Hipath 4000 v5,
AC win restarts as soon as call is received or initiated outwards with a dialing code. But the alternative physical phone works fine.
the machine was restarted, the licenses were checked, the route, packet drop.. all checked.
Please advise
most of 20 years of association with Siemens dealt with Hipath37 /3800. Hence my questions about H4K are basic.
Is comscendo licenses essential for analog extension?
if no, can we just keep on adding analog extension cards if we have rack slots and cards available?
are these licenses...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.