Don we did another clean install from scratch and the server is up and voicemail goes to expressions.
How do we retrieve the user's and messages from the old harddrive/ backup.
Thanks in advance!
Greetings:
We recently had our hard drive die on our expressions server.
We had to rebuild xpressions on another hard drive with a backup that we had from 6mos ago.
The problem we are now having is in the picture attachment has anyone here had any experience with this type of problem before...
Greetings:
I tried all the commands but they did not show anything was down or not working properly. My colleague decided we should bring down the loop on the Nortel side and pull the smart card from the CO and that worked.
So now I have another method to try if this ever happens again...
Greetings Tek-Tips:
We have a Siemens hipath4k connected to a remote Nortel switch and they are unable to communicate with each other using 4digit dialing.
On the Nortel side everything looks to be in order but I don't know where or what to check on the Siemens side to make sure everything is...
Thanks @Sbcsu for the prompt response.
We changed a setting in the ISDN API voicemail profile. We unclicked the call forwarding to external calls. This was just before you responded.
Before when a caller calls into their voicemail account there is an option to transfer out and with the...
We have a Siemens Hipath 4K system.
We were alerted by our CO that a number of calls have been going to Barbados that totaled to 45,000 dollars in one day.
we were told that our main number from the outside will be blocked until we found the source.
In our research we found some numbers had...
We have a Siemens Hipath 4K system.
We were alerted by our CO that a number of calls have been going to Barbados that totaled to 45,000 dollars in one day.
we were told that our main number from the outside will be blocked until we found the source.
In our research we found some numbers had...
Greetings:
It's been a little while I hope everyone is well.
I'm having an issue activating a PEN. We installed a new card not to long ago and we was able to add a phone to the card using:
BCSU and DSSU.
I am in the process of adding a new phone to the card but when I attach my tone...
sbcsu thanks for your reply.
Either comwin or assistant would work for me.
As far as the license count goes from the information displayed it will not indicate the amount of phones in use but the amount of our maximum capacity for phones?
There isnt an AMO for just station counts?
Thanks for the reply. I am one of the maintainers not the senior guy he doesn't like to help me he wants to look good. We are using Optiset basic entry and advanced phones. 12 shelves at least 50 cards not all have phones on them. 1 IP card.
Hipath 4000
Assistant V4
RMX V4 R2.1.60/UW7 V4 R3.0.0...
Greetings Community:
I was trying to get a set count from our Siemens Hipath4k but I am not quite sure how to do it and where to look.
Any advice would be greatly appreciated.
Greetings:
We had a consultant come on site after I changed both cards and the clock to primary cause the pri was still dropping. He comes in and it didn't drop while he was there it stayed up for 3 days then failed today and had to bring it back up. I thought maybe Verizon figure out the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.