Search results for query: *

cheers, please have a look at these settings on the attached pic what does "no route to destination" mean

Hi guys On bcm50 6.0 what's the best outgoing route pattern to use so that all digits dialled regardless of length will be accepted by the trunk. I have tried the option all, 0 and 1 and selected all wild cards but I get (no route to destination) each time. Cheers for your response

Hi all is it possibe to network an sl1100 and sv8100 together so that extensions and features can be shared over the network etc Would this be done via a VOIP H323 trunk or gateway and if so how would it be configured Also has anyone got PCpro for SL1100 UK Cheers

I recently came across this thread which I thought was interesting. I would love to see if the creator has had any success with it in terms of establishing how to amend the call progress tones. https://www.tek-tips.com/viewthread.cfm?qid=1802080

Cheers Firebird, I will try flashing some of these to the phone and see if they work. The earliest sip versions for 11 series didnt need a token so hopefully same for 12 series, thanks

Thanks firebird. With some perseverance I managed to convert them. The 1140 I converted with rls 2 firmware but just trying to turn off extended features for the 1230 in order for it to not look for token licence. Was there any rls of firmware (sip) where it didn't look for token licence. Tried...

Folks converting a 1230 from Unistin (062ac8v) to sip any rls really. I am getting FW reading....then FW failed. Even if I try to update the Unistim its the same. Here is my 1230.cfg file. Also tried doing it with a 12xxBoot.cfg in BootC mode. I have got there in the end before but with much...

Ok so there isn't a similar file available anywhere within the IPO to amend such settings for the digital phones even within root folders no

Yes this was one of my questions earlier regarding weather or not this file also included the digital phones such as the 14 range. Is there a file for them also to amend such settings.

Thank you all for your imput. No further low sounding telephone calls after this hopefully Cheers

I basically want to change the tx gain for the 1416 range of handset. Does the 46xxspecials.txt fie contain the same parameters as 46xxsettings.txt need to change this file as the options aren't available in the portal.

Brilliant thanks for reply. Does it cover all ranges of phone, just 46 range or is there a similar file for each series like for example the 14 series

Can anyone tell me where the 4xx settings file is located for IP OFFICE. is there a file for all ranges of handset like 14 range etc. Want to increase the TX gain value for 1416 phones Cheers

Is it possibly a NAT issue?. Have you considered registering the trunk directly to a SIP phone then see if there is any audio issues which would rule out it being the system and associated equipment or the actual trunk itself

Hi folks this is not something that most will notice if your calls are from SIP to SIP or ISDN to ISDN etc as the volume will be perfect. What I have found is that the speech volume transmission from handsets on the IPO such as the nortel 7000 range and the avaya 14 digital range can be...

Hi Folks, Is anyone familar with the 0604DAS.bin release of firmware for the 2000 series of IP phones. Was there any issues known in terms of getting the "DHCP not reachable" timeout. Have tried truning DHCP off and connecting manually but the phase 2 2004 phone will not connect to any call...

Cool I'll have a look at the bcm settings but if this only happened after the firmware changed to the 0604DAS firmware and the phone connected prior to this might it be an issue with the firmware load on the phone I'll check out the CS1000 forum as well Cheers

Yes the transitional firmware is sent from the MCS 5100 to the phone as it only connects via UFTP until fully converted to sip. So I guess not having access to the MCS 5100 rules that out lol. Yes as you say the 11 and 12 connected to tftp even in Unistim mode...

definatley connected to the network port and not PC - the phone wouldn't turn on otherwise. It worked fine until it downloaded this particular firmware

yes already tried that, perhaps the phone didn't take fully to the firmware, it boots up and goes through the process then times out after dhcp unreachable or if i turn dhcp off with static ip it doesn't connect with the server