Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sip trunk outgoing route

Status
Not open for further replies.

pabx1121

Programmer
Oct 16, 2013
109
IE
Hi guys

On bcm50 6.0 what's the best outgoing route pattern to use so that all digits dialled regardless of length will be accepted by the trunk. I have tried the option all, 0 and 1 and selected all wild cards but I get (no route to destination) each time.

Cheers for your response
 
You want to let the SIP Trunk setting do the absorbing of the Dest code and not the DialingPlan.
Also a past common mistake was to enter all 10 digits (0 1 2 3 4 5 6 7 8 9) in the Routing Table in SIP Trunking, instead it should be the same as the Dest code in DialingPlan

I use 2 digit dest codes because of the amount of SIP accounts I have...

Example when using 91 as a dest code:

Dialing Plan
-Route 091 uses BlocA/Public
-Dest code 91 uses Route 09, Absorb is set to 0
-PublicNetwork DN lenght - add DN 91 and length 13



SIP Trunking/Public/Routing Table
-AccountName/Destination Digits is 91

SIP Trunking/Public/Accounts/AccountName/Advanced/
-Outbound Called characters to absorb is set to 2


I have some account examples in the FAQ's here











small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
cheers, please have a look at these settings on the attached pic
bcm_dtpopp.jpg


what does "no route to destination" mean
 
Means a routing issue.

You have not showed your routes or any of the routing settings in SIP Trunking.
Why is your 9 DN length at 15?

Regardless, I suggest you try the exact steps I have mentioned.
If using 9 then just substitute 91 for 9.

small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top