Search results for query: *

Thanks Belevedere I can always count on you for the answer! Would I have to construct an entire CS table for that or can I modify our existing CS tables?

Morning Folks, I have a question concerning the DND feature on the Dterm phones. Is there a command within the MAT to remove DND activation Via the Mat as opposed to physically going to the set to deactivate DND or from the LEN itself? We have multiple PBXs throughout the county and when a user...

Well Belevedere... you have saved the day once again[thumbsup2] after using the generic software from the Cd to format and over write the basic program set the sense wheel to "1" and powered up the CPU in a matter of 2 min we have "S T B" on the status read out! I set the Sense wheel to "2"...

Well the "Hot Swap went well but had the same results as I had when I reformatted and re-wrote the original Flash drive. A spinning status display window and no WDT light. I'm still concerned that the LAN connection only shows the connectivity light but no activity light. Can anyone point me in...

Thanks for the response Belevedere, yes we do have redundant CPU's, I did perform a MEM_HDD backup and used that from the active CPU to overwrite the suspected Flash drive from the suspected faulty CPU. My results where that the CPU status indicator on the suspect CPU went from a steady 0...

Hi all, I'm currently having an issue with our 2400 IPXs at one of our sites where the 1 system (CMOD shows the CPU in standby)CPU will not come on line. It has a WDT light indicator and the LED read out indicates 0. When I do a MEM_HDD all saves from that CPU fails. when I atempt to log off sys...

Belevedere stated, "The resident program sets the trunks up as loop start. Verify that the Verizon trunks are loop start. Measure the loop current and voltage supplied on the lines from Verizon. They should be 26 to 50 ma at no more than -48vdc. If they are in spec and you are still at the...

WOW!! Thank you guys for all the posts. Sorry I haven't responded in the last day but we are currently under the "doing more with less" (manpower) doctrine. I'll try and answer as many concerns that you all have in some sort of organized fasion. 1, After install of IVS2, once CO lines added to...

Hey all, I recently bench tested a 2000 IVS2 system and deployed the switch to the site (had 2 lines as test lines attached to the PN-8COTS card with no difficulties .At the site after adding the verizon supplied lines to the trunks, every one of the ports that had a Verizon line connected...

Blevedere, THANK YOU! cmd 3019 was it! You guys Rock! too cool[peace]

Thank you belevedere, I can change the "DDD" to whatever I want however manual trunk selection still displays the 1000 I don't believe that is part of the trunk name. here is a pic of what I'm trying to get rid of... Thanks again. [/URL]]

Thank you Ozzie for the response, I'm still having difficulties getting the display to show the CO line #. Under the resident program by default CMD3500 was >00 (DDD(CO,DID,ISDN,SIP) Trunk I programmed CMD3500 to: >15 (not used)for all trunks, which removed the DDD display on the phone Now...

Good morning folks I'm currently bench testing/setting up another IVS2 to reissue to another customer in the field, I've reinitalized the system with the Resident program and currently trying to change the display name for each of the trunk names that appear on the dterm when activated...

Thank you for a lighting fast response guys! Ozzie, The site's current level is set for: 5 which is 16-20 second duration according to the command manual. I will adjust accordingly. belevedere: F85>ff03>P1 (not sure if that is it) top of Matworx states: 3713P1-0001.04 Thanks

Hello Folks, First off, Thank you for such an informative Tech site. We currently have a site with an IVS2 and I currently have a customer that has an issue with the amount of rings a call has prior to rolling over (Call Fwd no answer) to his station. Currently the number of rings is 7. he...