Search results for query: *

Thanks guys You'll be pleased to know everything went well all IPs successfully changed. Some notes from the experience for anyone else coming to this thread later. 1. Rebooting the call server took a long time, on our CPMG128 card shutting down took almost 20 minutes and booting up took...

thanks for your help Jeff, a few questions 1. Any particular reason for using cli rather than base manager to perform this task? Is the CLI method more reliable? 2. Thanks for the note about Media Gateway addresses, my Media Gateway has two addresses (one for the DSP daughtercard) are there...

Looks like I also need to run the configuration wizard in call pilot manager to update the clan address after I have changed it in Windows.

I need to move the tlan addresses on our CS1000 to a new subnet, the elan addresses are all staying the same. The CS1000 is on 7.5 and the sig server is co-res with the CS. As far as I can see there are two addresses allocated. One for the linux base and one for the sig server. I can change the...

That sorted it, I added 0161 for the local prefix, 0 for long distance and 00 for international and the numbers are now coming through correctly.

CS1000 running 7.5 Call pilot running 5.0 When we receive an incoming call over our PRI line from a local landline the number is displayed correctly on the phoneset as 01613456789 When that call leaves a voicemail the voicemail envelope reads the number back as 93456789. 9 is the prefix we use...

I've started using the layer3 functionality on a stack of 5520 switches. The setup at the moment is quite simple. I have a subnet on vlan1 with the range 192.168.36.0/22 the switch has the ip address 192.168.36.9 on vlan1 all the problem computers are in this vlan vlan60 is connected to the...

Are these brand new phones or refurbished, they might just have had they keys relabelled.

So there is no way you can think of to have a busy situation with both lines one a single phone? Problem with your suggestion is that currently the DN on key 0 is auto answered but the DN on key 1 isn't. The DN on key 0 only rings when the staff member is logged onto their computer where as the...

Thanks, LHK is already set to 0 and I can't set HFD because I have AAA My problem is not hunting to the next key, in the example above the user will be on the phone on DN 2528. Then a call will come in on DN 7586 I need that second call to be greeted with a busy tone. Currently it buzzes the...

I have an i2002 set with two DNs both SCR cls AAA is set so that the DN on key 0 answers automatically. When a user is on a call on the DN on key 1 I would like the whole set to be busy. Currently if a call comes in on key 0 the set buzzes and the calling party hears a ringing tone, I'd like...