Search results for query: *

Just had an old customer call me with an 8.1 IP500v2 that suddenly had their phones go dead. They are running a 500v2 with TCM8 cards and a PRI. The config is currently showing all cards unknown. Attempted upgrading to 8.1(95) from (69), but that didn't help. I'm assuming this is some sort of...

I used the late, great Kyle Holladay's guide to create my conference bridge. I think it's mirrored here. http://www.redtelone.com/ipohelp/HOWTO_menuConference.aspx/index.html

It's working normally for me, but the Office 365 admin panel has this status as of Oct 20, 2015 2:32 PM Eastern Current Status: The deployment of the fix is approximately 83% complete. Engineers are continuing to monitor the progress of the deployment to ensure it propagates as expected...

you're right, my mistake.

No license is needed for upgrades within a major release. The upgrade wizard will show you the available license and the required license for your upgrade.

Click dial by number on the AA tab and change the action on item 1 in the AA table to dial by number.

Doing the one by one thing now. I had already tried it with just the DS8 / just the combo in.

I'm on phone with Avaya and he wants me to rebuild the SD card. Heh.

Yep, cards are displaying properly. Nothing is showing invalid in the system status. Looking in system monitor it doesn't appear that anything is trying to upload. The phones aren't powering on at all. Headed back to site with a new KSU now. Will let you guys know how it goes.

Guess I am lucky in another way then. Thanks for the info. :D As you probably guessed, moving the cards around did nothing.

I'm thinking the issue may be that the Combo card is in slot 1. That's been something I've found to be problematic in the past. Going to have my guy swap the cards once he gets to site.

It's all the phones, on both cards.

I've got an IP 500v2 with a combo card and a ds1-8 with a PRI card on board that is currently experiencing this issue. PRI us up and when I log into system status I can see all the calls coming in, but when I click on extensions they all show as unplugged. Had customer plug a digital phone...

Is it going to voicemail instead? What's your no answer time set to? Remember it's actually no answer + overflow time before it gets to that overflow group. If that time is higher than your voicemail answer time that could be why you're getting the error.

Intigrant has it right, this is in the analogue options under the specific line entries.

Thanks for the response intigrant, I'll take a look at her home network to see what I can do.

Hello folks, I've got a 9630g configured for remote h323 access. It worked just fine from my office, but when my customer tries connecting he gets stuck in a reboot loop. I'm looking at Monitor and I'm seeing it connect, and then get disconnected because of "reason 6" (does anyone have an...

I have only had bad experiences with the UC Module. Last one I installed crapped out in about 3 months. I would suggest maybe hosting VM Pro on a virtual machine instead.

You could try upgrading to 8.1.81. Also knowing what the call flow looks like would be helpful. It's ringing to the first hunt group where your receptionist is the only member? Is queuing on? What kind of hunt group? What are your timers? Does the receptionist have multiple appearance buttons?

https://support.avaya.com/downloads/download-details.action?contentId=C20146111415503870_3&productId=P0160 Here's the link for the plugin