Search results for query: *

Thank you for the replay I do understand that it was pulled from Avaya's site along with a bunch of other stuff in 2018. That is the reason I had asked here hoping someone might still have the ISOs or Disks in their collection.

Hello all, I need to reinstall the CM 3.1 software on a S8300B and I am in need of the 3.1.4 or 3.1.5 ISO images. The image files I am looking for are S8x00-03.1-01.4.642.1.iso or S8x00-03.1-01.5.642.3.iso If anyone has either one of those ISOs in their files please let me know.

bignose21, I sent you the FTP info.

Google drive or I have a FTP server. My tek-tips user name is the same as my gmail address.

bignose21, yes I have the scsi cd rom and cable.

Its all good curlycord, it happens to the best of us. I will try to see if the 202 image will load on the 201 (probably wont work) I will have to try and locate a Image that will work.

I had version 5 running on a NTRH30AA card (Which is what I thought is referred to as "201i") Upon looking through my Call Pilot disks I have the ones that went with a NTRH31AA card (I thought is referred to as "202i") Can the disks that came with the NTRH31AA card be used on the NTRH30AA card?

I have a Call Pilot 201i V5.0 that has a failed disk. I only have the 202i image disks for release 5.0, am I able to use this image for the 201i? If not where should I look for a copy of the correct disk set?

Hi, I am attempting to connect a BCM to a CCM via pri with 4 digit dialing between the two and also have the bcm go through the ccm for outside dialing. i have the connections up and running however i can call from the callmanager to the BCM but only if i assign a a line to a phone/dn i still...

its on a IP400, i just need to have 4 digit dialing between the two and have also have the callmanger provide the outside lines

What is the best way to do a PRI between an IP Office and Cisco Callmanager.

I just tried it and it did work. Running BCM 3.7

can the 1140 be used on a BCM with 3.7 software?

TO go from ipoffice 5.0 to 6.0 what is all involved? or is it better to get a IP500v2 and run 7 let me know both ways pros or cons please i have some newer avaya IP phones donated to us and i want to be able to run them and i belive it will take 6 or better

whats this i read on here that the 200 can be upped to a 400 with base tray change or something? will the bcm200 support verson 5.0 or 6

does this system require a keycode for the T1/pri card so i can cross connect to my callmanager?

thread1361-1617856 Okay ive set the class of service to NVM and mail box to such however i still get no prompts on callpiolit my users prefer the older style on how it works...any ideas? how can i reset the config of callpiolit to start over new or am i missing somthing?

ive tried all ways in there and all the i2004 sets show is the enter your password and no voice prompts.... ideas?

Hi i just setup a BCM 3.7 with callpiolit and i have ip and CP licences on it i have I2004 sets setup on it..how do i get the call piolit to use prompts like the older nortel systems insted of the onscreen stuff? my users are confused. how do i get it when you push the Vm button or dial VM dn it...