Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mrraymond

    CS1000E HA 5.5 patches

    https://espl.avaya.com/espl as already mentioned you will need logon credentials.
  2. mrraymond

    BCM50r6 (Avaya) and MWI

    Do yo have the latest SU installed? BCM050.R600.SU.System-003.201101-2
  3. mrraymond

    Release 6 SU 005

    I downloaded from Avaya tech page BCM050.R600.SU.System-003.201101-2 and successfully uploaded to my BCM50 6.0. System seems fine with this SU.
  4. mrraymond

    Unable to register IP phones

    If your key codes are correct check to see that you are running the latest version of element manager
  5. mrraymond

    BCM 50 matiching DN to Application port

    I am looking for a list or source of information that will provide port numbers with the actual application service. Application resources does not provide this information while under All Dn's the port numbers simply provide a DN and nothing more. In setting up Service DN's for the Auto...
  6. mrraymond

    Routing digit "9" from BCM to CS1000K

    Delete all default appearances of 9 from the routing table and line pools build a new route and using VOIP trunks BlocA under DN type select Special International. Build the destination code with 9A absorb 0 If the NRS is programmed correctly full dialing will now take place using "9"
  7. mrraymond

    BCM Training Suggestions??

    Buy a BCM on EBAY and train your self at your own pace and with the help of forums like this. You should be able to buy a BCM, with a few licensees for unified messenging, IP and digital sets for under $1500. Does not need to be brand new. If you really get into it then you might buy...
  8. mrraymond

    Routing digit "9" from BCM to CS1000K

    Appreciate the thought and efforts you all have provided in finding a solution to this problem. This is a new machine with no programming other than what I am doing now, thus there are hidden trunks pools built somewhere deep inside. As i mentioned I am already passing digits to the CS1000...
  9. mrraymond

    Routing digit "9" from BCM to CS1000K

    Delete Destination code "9" add new route add new destination code "9" and assigne to new route insert 9 to route Yes, I have also tried this suggestion. The 9 destination code can be entered under a new route but it still will not pass to the VOIP trunks. Only if I use an access code then...
  10. mrraymond

    Routing digit "9" from BCM to CS1000K

    Yes, you are correct 9 can be used against route 000 but it is defaulted against Pool A (analog trunks 61-64) I want 9 to got out against BlocA (Voip 1-4) Route 00O Pool type can not be changed, and when an attempt is made to delete the line am prompted with " Error Route 000 can not be...
  11. mrraymond

    Routing digit "9" from BCM to CS1000K

    Please disregard the "K" at the end of CS1000K It is a "CS1000E" that I am working with.
  12. mrraymond

    Routing digit "9" from BCM to CS1000K

    I am routing digits from BCM 3.0 to CS1000K via VOIP trunks. I want my BCM users to dial 9 for making PSTN calls via the CS1000K as calls on this route are most cost effective. Route 000 and destination code 9 are built as a system default configuration and cannot be changed or deleted, this...
  13. mrraymond

    Seeking help in BCM50

    You have got Voip GW trunks on each switch and a VPN whereby you can ping from one BCM to another ....you now just need to work on getting all the settings correct. Takes a bit of time on your first go but it does sound as though you are headed in the correct direction.
  14. mrraymond

    Changing ALL default DNs BCM50

    Thanks for the the help guys....
  15. mrraymond

    Changing ALL default DNs BCM50

    Its really to late in the game to default the system ...i did not see any place to do a range of number changes. I started with default DN 221......i then changed the system to 4 digits which resulted in 2221.... from there I went about changing each DN individually.
  16. mrraymond

    Changing ALL default DNs BCM50

    The entire "2" range is a part of the system wide CDP, thus I need to change all the default and application Dn's to leading digit "5". I am using using four digit dialing. I individually changed each and every DN today taking more than 90 minutes of time, however I have got six more BCM's to...
  17. mrraymond

    Move Target lines on 7316E

    Perfect advise however it could be a very long day to move target buttons on several dozens of phones. Am I correct that there is no way to modify target lines within the button programming in the element manager?
  18. mrraymond

    BCM 50 startup

    Plug a digital phoneset into the first port on your 25 pair switch tail and then check the IP address thru the telset features as shown below. Note these instructions are for LAN 1 not the OAM port. After you get into the BCM then go into the OAM and fix the IP address at that location. If the...
  19. mrraymond

    Move Target lines on 7316E

    Thank you Gentleman for your quick response. I will give the F*81 a go. My mind was stuck in element manager as opposed to looking at possible feature codes. Yes, the lines are set as appear and ring and do light up on the top two left keys. I do understand that they can not be moved over...
  20. mrraymond

    Move Target lines on 7316E

    My target lines are ringing incoming VOIP lines correctly however I would like to put the two button appearances of them to be placed above the two intercom buttons on the lower right side of the telephone instrument. I have been thru the books and back and forth thru programming for many, many...

Part and Inventory Search

Back
Top