Search results for query: *

It took me a while, but I actually got mine to fail back automatically. I have two connections at each site, but at the main site I'm using both connections, one for internet and the other for vpn's. The vpn's can fail back to the internet connection if needed. At the remote sites I setup the...

I have an ASA 5510 at our main office. At our branch offices we have asa 5505's. Currently we have DSL connections at each branch, but we are adding T-1's to each office. I would like to setup the T-1's as the primary vpn connections and the DSL as a secondary vpn connection. Is there a way...

We had a fire marshall come through a few years back that made us fire stop everything or face over $100k in fines. So we seal everything. I've been looking into the self sealing cable transits for future installs.

Oldtimerbob, Thanks for your input. We are a hospital, so we have phones everywhere. Hallways, patient rooms, dicatation lines, and fax machines make up almost half of them.

Buitenhek, Thanks for your detailed analysis. Our architect said it would cost less than $50k, I knew he was way off base. I think I'll budget about $125k to be safe.

Yes, we are required to run all plenum. We typically run the same cable everywhere because offices move so often. That way we can repurpose them for the needs at the time. Plus I think we're going to go all voip anyways. Thanks,

We are presently in the process of planing a complete tearout and remodel of our building. The architect wants to completely relocate our datacenter and phone system to another area of the building. During the process, we will have to completely rewire the building. Currently the existing...

50 mm fibre is certified for 10G ethernet up to 550 meters depending on the quality. Unless you have a distance problem, IE your links are more than 1/3 a mile a way, single mode would probably be a waste of money. The optics are 5 to 10 times more expensive and will have to be replaced more...

I called polycom and found out the power adapter is the same as the dcp power supply for the premiers. Is there a part number on the adapter that goes in between?

Does anyone know what I need to power the 4690 conference phone? I purchased one without a power supply figuring it would work poe and it doesn't. I looked at the product description and it says it has multiple power options. However I can't find anywhere where it tells what those options...

Well that didn't fix it, but it did get me pointed in the right direction. I had to plug a phone into the port and turn off the night service button. Then it let me remove both the station and trunk. Thanks, Dustin

I have cm 2.0 on a g3si. We got rid of one of our offices a while back and I'm trying to get rid of the extensions and trunk group however if I try to delete the main phone it gives an object in use error because there is a trunk-ns button on the phone. It shows object in use everytime I try to...

Phoneguy, do I just tell it to del all digits? If so what does that do to the call, just drop it or send it to the operator? Thanks for your help.

We are running CM 2.0 on a g3si. We have pri circuits with did's on them. We have run out of extensions so I had to open another block which was previously reserved for FAC's. I segmented the block with 700-719 being fac's and 720-799 are extensions. I just bought the range of did's for the...

you need to setup an inspection rule for all the services you want to allow.

I have setup an existing hunt with remote call coverage. We are routing calls from one of our existing numbers to a new location, not ideal, but they didn't want to change all the documentation. It works fine in-house and it works fine remotely as long as there's not more than one call. I can...

Tomim, Just for security reasons I would not allow external access to VNC. I learned it the hard way a few weeks back. I just opened it up for a day for a company to do some remote troubleshooting on their system and it got hacked. Use a vpn.

Does anyone have a copy of the 1.61 firmware for an avaya 4630. I had to factory default a set because of a corrupt firmware and all of the new firmware requires that you load 1.61, but Avaya nolonger offers this firmware on thier site.

I tried booting it again holding down the * and it did the same thing. It never says anything but the welcome screen and then immediately goes to upgrading bootapp with no other messages in between.

No, I'm in the US, but I converted the prices from what I pay in the US. Unless they just charge more in Canada on top of what we pay, but I was under the impression that you could actually buy Avaya equipment cheaper outside of the US, hence the "gray market".