Search results for query: *

I just installed a 5610 IP Dect SIP cordless phone. I need a to deliver the number back out on PRI. I usually use associated number in 3300 forms for MINET phones but doesn't seem to work on SIP devices. The number im delivering is good for delivery out Any help appreciated

Everything you quote should be Virtual...vMCD vMAS...Number one thing people that jump on the SIP bandwagon dont realize is the most costly item in any comminucations platform are phones and SIp or No SIP you still have by them unless you go softphone everywhere. SIP is fine but there is still...

Anyone using Microsoft Lync 2013 with MCD/3300 instead of Unified Communicator. I know UCA has a Lync Plug-in but I am talking no UCA at all. I have a customer that is interested.

When I built the ARS Route I made the mistake of selecting Route Type of PSTN Access Via DPNSS...there are 4 options of type of route Emergency, Blank, Non-verifed Account, PSTN Via DPNSS...should have been BLANK

Fixed it. When I built the route I made the mistake and added to the Direct IP Route -(PSTN ACCESS VIA DPNSS). Should have left it blank on that parameter. Not very good information on setting up DIRECT IP ROUTING in E-DOCs

Sorry it will go extension to extension but transfering an outside call from existing cluster to new cluster with embedded voicemail will not go. I have checked call rerouting.

I have just added a new 3300 to 2 system Cluster. The new cluster is using embedded 3300 voicemail. The first 2 controlers are using MAS. When calling the new cluster I can't get the voicemail to answer on the embedded. I can call voicemail directly on the new cluster(hunt access code 6000)...

Key System Features such as being able to assign individual analog lines like a 200ICP. Also be able to suppress Calling Line ID on a per call basis on outbound PRI Non-SIP calls.

We are just in the beginning stages for implementing SIP trunks on our 3300. Is Mitel Border Gateway required for SIP Trunks?

I just setup Oaisys call recording 7.2 on MCD 5.0. Works great!! However is there a way to ignore calls with a duration under 30 seconds. I have looked everywhere and don't seem to see it. Any help is appreciated

Current on speaker is plenty especially if you buy a valcom 15 watt...they are self ampified....all you need is a power supply, horn, audio from speaker inside phone...very simple...buy a Valcom V-1030c 5 watt or V-1036c 15 watt and power supply

I would just tap into the audio of the speaker under the handset. Take the screw loose from back and there is a red and black wire that goes from the circuitboard to the speaker for ringing and paging depending which model. You can either solder or super glue a pair from Cat5...run it out the...

plug up new phone....it will say use superkey to send pin....###110 and blue superkey...this will send new MAC to 200ICP as a replacement....typically ### is replacement code

1. Key system features like the 200 ICP. Ability to add individual lines to phones. 2. Voicemail key (like 200 ICP) for transfering callers directly to there voicemail greeting...I know there is a 3300 work around but it sucks. 3. Ability to suppress your Calling Number on a per call basis...

I have a trunk page port set up on a 3300 CX 5.0 to interface with a Valcom Multipath. I works fine for a while but then page port busys out and I either have to restore by maintenance command or reset the 3300. The multipath port never busys out just the trunk port on the 3300. What could I...

200ICP actually has a COS option to block extension to extension calling because of hosptality ....But the 5600 is i think based on 3300 call control and the only way I would know how would be to put each extension in as a different tenant...then block tenant calling...it would be a nightmare...

Does a SIP device have to be created in the MBG for the UCA Mobile to work?

I am trying to get UCA Mobile to work on Andriod and IPAD. UCA is 5.0 and MBG is 7.1. I have UCA PC Client working on my laptop and on remote IP phones working through MBG. The MBG is in the DMZ...NOT NETWORK EDGE 1. I have UCA Mobile licenses and MBG Licenses 2. I have real world FQDN for...

install an analog extension to everyones desk....install the Viking VR-1A instead of phone...make the analog extension/VR-1A the voicemail boxes extension....when a message is left it will light the Viking VR-1A...then they will login as remote voicemail user and check the analog...

root@nupoint ~]# cd / [root@nupoint /]# cd /usr/vm/bin [root@nupoint bin]# restartUmPro.sh Restarting UM Pro services: msbBridge umProServer mailboxDepot - Terminating msbBridge...... - Terminating umProServer - Terminating mailboxDepot - Starting msbBridge, pid = 12160 - Starting...