Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mitelfang

    delete path issue

    Hi guys! When i delete a path the system response a warning?‘no matching record was found’?anybody knows how i can delete it. THX!
  2. mitelfang

    IP Phone automatic change ICP1 address

    hi LoopyLou i did not find any other RTC address. i think this issue maybe caused by OPS,but i do not how.
  3. mitelfang

    IP Phone automatic change ICP1 address

    hi LoopyLou the phones not re-home to local ICP,unless restart the phone.
  4. mitelfang

    IP Phone automatic change ICP1 address

    hi dryaquaman i have checked the OPS?the secondary controller is blank.
  5. mitelfang

    5550 Call History

    hi guys! i have finished postgresql installation?and 5550 can connect with it.but i can't see the called number by PRI?the called number is blank?
  6. mitelfang

    IP Phone automatic change ICP1 address

    Hi guys! In my network has three ICP composition Cluster,that managed by EM & OPS. Now all the local IP Phone automatic set its ICP1 IP address to remote office's ICP controller. So once local ICP restart,all phones will stop at waiting PIN screen. Even I set static IP,IP Phone also automatic...
  7. mitelfang

    UC Mobile client & provisioning

    i just installed UC client one time,and provisioning is no problem. but i think the sms including some message such as the number ? server IP address ... so you must use the SMS provisoned by your owen server.
  8. mitelfang

    UCA 2.0 client send Certificate request failed

    hi LoopyLou i konw that. follow boycey9 's advise,i found port 80 isn't open. i think it is network problem,and i will ask custom to check it.
  9. mitelfang

    UC Mobile client & provisioning

    Make sure you can access https://provisioning.emccsoft.com/mitelws/provision.asmx
  10. mitelfang

    UCA 2.0 client send Certificate request failed

    Dual NIC server and gateway mode
  11. mitelfang

    UCA 2.0 client send Certificate request failed

    i check the port?port 80 isn't open. i wondering this is MSL setting or network problems?
  12. mitelfang

    UCA 2.0 client send Certificate request failed

    thank you,i will check it.
  13. mitelfang

    UCA 2.0 client send Certificate request failed

    i see notihing in server
  14. mitelfang

    UCA 2.0 client send Certificate request failed

    UCA 2.0 client send Certificate request failed I can send Certificate request to LAN IP address,and can send it to another teleworker server. But when i send Certificate request to my custom server ?UCA client always promote me failed.
  15. mitelfang

    5324 with PKM

    i found the problem. mitel have a new verion PKM module for 5324 set,PN 50005662. i installed module is old verion,PN 50005225. thank you,guys!
  16. mitelfang

    5324 with PKM

    yes,it is 2.1.0.34 i select Auxiliary Module PKM 48,and restart 3300,restart phone.
  17. mitelfang

    5324 with PKM

    i delete the phone and add a new phone but it no help.
  18. mitelfang

    5324 with PKM

    hi guys! i installed MXe with MCD 4.0 10.0.0.10_2. now i have 5 48PKM installed with 5324 IP set,but they didn't work. i found the mitel Knowledge Base Article 09-5127-00045,and upgrade my MXe 5324 fw to 3.1.0.24,but the PKM also didn't work. is anybody have the same problem?
  19. mitelfang

    ME client provision failed

    Hi guys?my ME server can provision successed?but i didnt do anything. i think maybe the provision server will block the ME server that sent too much SMS within a period of time.
  20. mitelfang

    ME client provision failed

    ME server in server and gateway mode directly connect to Internet. KarstenHuhn ,when you found this problem?

Part and Inventory Search

Back
Top