UCA 2.0 client send Certificate request failed

[mitelfang]

UCA 2.0 client send Certificate request failed
I can send Certificate request to LAN IP address,and can send it to another teleworker server.
But when i send Certificate request to my custom server ?UCA client always promote me failed.

 

[LoopyLou]

Do you see the request appearing the the teleworker server so you can approve it?

 

[mitelfang]

i see notihing in server

 

[boycey9]

Make sure port 80 is open for the cert request

 

[mitelfang]

thank you,i will check it.

 

[mitelfang]

i check the port?port 80 isn't open.
i wondering this is MSL setting or network problems?

 

[tomcotton]

If you describe your firewall/DMZ scenario people should be able to help

 

[LoopyLou]

How is the Teleworker installed on your network? Single NIC, Dual NIC, in the DMZ?

 

[mitelfang]

Dual NIC
server and gateway mode

 

[LoopyLou]

I can send Certificate request to LAN IP address,and can send it to another teleworker server.
But when i send Certificate request to my custom server ?UCA client always promote me failed.


The request should be sent to the WAN or external, routebale IP address not the LAN address.

 

[mitelfang]

hi LoopyLou
i konw that.
follow boycey9 's advise,i found port 80 isn't open.
i think it is network problem,and i will ask custom to check it.