Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

5324 with PKM

Status
Not open for further replies.

mitelfang

Technical User
Oct 21, 2009
29
US
hi guys!
i installed MXe with MCD 4.0 10.0.0.10_2.
now i have 5 48PKM installed with 5324 IP set,but they didn't work.
i found the mitel Knowledge Base Article 09-5127-00045,and upgrade my MXe 5324 fw to 3.1.0.24,but the PKM also didn't work.
is anybody have the same problem?
 
They should work
Did you selected the pkm at the extension ?
You need to assign it before it works




ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
i delete the phone and add a new phone but it no help.
 
But did you selected the right PKM at that extension ?




ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
I just read this on Mitel's site:

"On Dec 11, Firmware version 2.1.0.34 for 5324 is released to address PKM's sync issue"


2.1.0.34 sounds older than 3.1.0.24 which you mention above, unless someone made a typo....
 
yes,it is 2.1.0.34
i select Auxiliary Module PKM 48,and restart 3300,restart phone.

 
i found the problem.
mitel have a new verion PKM module for 5324 set,PN 50005662.
i installed module is old verion,PN 50005225.
thank you,guys!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top