i normaly do this with the digital module, but it didnt think it was nessasary for the phone 30???
is there even a bin file 3.2.99 for the phone 30 module?
hey guys,
just wondering what settings i could look at or possibly change to make a 4621sw sould better when using speaker phone. the people in the outside world say it sounds like im in a tunnel......the sound on the 4621 sounds great.
any help would be great.
set up.....
406v2 5.0.15...
I have a post out there asking what provider I should use for a customer of mine. They are going to make most of their calls overseas in the middle east area. Would nexvortex be a good provider for this application?
406v2
5.0.18
USA
Knoxville, TN
Thanks
Kyle
I believe they will be mostly calling the middle east area?
Sorry but I'm very green when it comes to SIP. Are you saying I should try to get a SIP trunk over seas and here in the states?
Thanks again!
how is this going??? i have a customer that needs SIP trunks.
they already have internet.....all they need is to get SIP trunks?
how can i get in contact with NexVortex?
are they supported by Avaya?
thanks
we have a customer who wants the ip office with SIP trunks. the reason is that almost all their calls are overseas. they are going to have a dedicated cable modem with 8 meg. down and 1 meg up.
they need SIP trunks.......i guess they would need a internet SIP trunk provider?
does this...
when we come along this problem......when 2 people are sharing the same phone.....we always give each user their own extension number and make them log in and out. that way they can have their own mailbox with their own greetings and so forth.........
fast and simple!
we had a proble like this with a system that had all IP phones. we found that the lan port was so busy we could not talk with the control unit. we could see it in manager...but when we put the password in to program we would get the same message.
we had to unplug the lan port...plug it back...
This is setup as a site to site VPN. This has been happening since we have installed it.
Maybe a bad vcm. I will check that.
Yes, we can dial the voicemail by pressing the message button, but can only do this once. If I hang up and press it again, I get dead air. If I wait a minute or two it...
here is a log of monitor....
as you can see the first call i made went through, but the 2nd and 3rd calls did not????
22172045mS H323Evt: v=0 stacknum=15 State, new=NullState, old=NullState id=-1
22172060mS H323Evt: v=0 stacknum=15 State, new=Initiated, old=NullState id=30100
22172377mS...
hey guys,
just wondering what i should look at for this problem....
2 sites...
both 406v2 4.2.14
1 site with voicemail pro (remote site is set up for centralized voicemail)
i can ping from ip office to ip office just fine....the problem is that i can make 1 call and be fine, but if i hang up...
we have used "call ride" before.....
we had a customer that had a receptionist that answered all calls....we set up a "call ride" button with a code of 100, 101, 102, ect....
when she "parked" a call...anyone could walk to any phone and press the code plus the # and answered the call.
craft worked great!! thanks!
now my phone just flashes???
it still says bad file server when booting?
is there anything i should change in the manager programming?
ip office 406v2 5.0.15 (just have it set up as a test unit before we install it)
everything is default....but i did set my PC...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.