Can a single extension be changed from dialing 9 for an outside line to something else??? Or give a single extension an access code to get a pooled outside line??
It is as when I dial to another ext or to 4533 it acts as expected. But this is weird, I tried you suggestion again of forwarding directly to the cell and it started to work? I have auto line select set to uses 828. I then used the forward button and dialed 95555555555# and it worked? Forwarding...
Something else that I just noticed, If I push the forward button on the 4424d and dial either more than 4 digits or start with a digit other than in the extension number plan, it quits trying to program the forwarding number, even with autoline select picking the 828 trunk... ( outside line )...
I did that also, first.... The issue seems to be that no matter what I am doing, calls continue to ring thru to extension and do not forward anywhere, even when you see it on the display and the button light is illuminated... The base matter is ext 4533 won't forward anywhere no matter what I do...
828 is assigned to extension 4533 and the extension that the call are forwarded to. The calls being transferred are being dialed in from a DID to extension 4533, then the forward button is utilized when no one is at extension 4533. The call "SHOULD then transfer via AA to extension 4543, which...
No, the call never forwards at all. 4509 does not ring and the extension that " SHOULD " forward, does not.. This happens no matter what extension for forward it to..
I have an extension that has a forward button. When I set the extension to forward, the light comes on, but the extension still rings and the extensions voicemail gets the call. The call does not forward. What could I be overlooking? this is a Merlin Magix, with a 4424D not DL connected.
A...
I found out that it is done at each extension with the privacy button or by dialing #31 from inside system dial tone only.... Thanks to all who responded... I used everyone's input plus old threads here to experiment and get it done!!!! Thanks Again to all!!!
I have the password, I just need a reminder of how to get to the menu where to put it in if you could be so kind. I remember that when you got there you had to select option #9 that was not given as a choice. I have merlin messaging.
I remember getting into system admin mode before but don't remember how. I remeber 6 digit password, but can't remember how to access the mode. I need to re initialize a mailbox and create a phantom mailbox.
I DO HAVE A PRI T-1 LINE AS OR ONLY PHONE CONNECTION. I DON'T KNOW OF ANY SPECIAL TABLES THAT WOULD HAVE BEEN PROGRAMMED AT TIME OF INSTALL BY INSTALLER. HOW CAN I CHECK THIS OUT? CAN I COPY SOME TABLES AND E-MAIL TO YOU TO LOOK AT OR YOU TELL ME WHAT TABLES TO INSPECT? I AM NOT SURE HOW TO...
WE ARE SELLING OUR OLD PARTNER II SYSTEM. IS THERE ANY WAY TO PROGRAM THIS SYSTEM OTHER THAN THRU EXT 10 OR 11 MANUALLY? MAYBE SOFTWARE LIKE OUR NEW MAGIX?
THANKS, THAT IS WHAT I THOUGHT. WE ARE NOT SENDING THE ONE. THEY TOLD ME THAT THEY DO NOT REQUIRE THE ONE AND THAT I SHOULD BE ABLE TO SET UP THE SWITCH TO REQUIRE THE ONE FOR A TEN DIGIT NUMBER AND THEN TO DIS-ALLOW NUMBERS STARTING WITH ONE. I COULD NOT SEE HOW TO DO THIS ON OUR SWITCH.
D&S COMMUNICATIONS CAN SELL A REFURB EITHER PC OR ENTIRE THING RESONABLE WITH 18 MONTH WARRANTY. THEY CAN RE-SERIALIZE EITHER PC TO WORK TOGETHER. I HAVE USED THEM SEVERAL TIMES FOR REPAIR OF PHONES. HERE IS A LINK TO COPY FOR THEM...
I have a merlin magix release 4.0 v7.0 . I have set facility restriction level to 2 and have set restriction level to toll restrict and can still dial a toll call by simply not dialing 1 ahead of area code. how can I restrict this? I have set frl to 1 and can not dial out other than intercom.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.