Search results for query: *

I'm looking for a template for printing out labels for an Optipoint 500 set and its extra button add on module. Thanks in advance for any help.

Customer bought the keycode and the PRI came right up. Thanks everyone for the advice!

I have a customer who has a BCM400 who would like to extend some lines through a channel bank. My question is how do I assign a number to a trunk on a T1? Currently we have a T1 built and interfacing a channel bank, but am not seeing where I can have certain numbers hit a a specific channel...

Do I need to get the MCDN keycode FOR A BCM to talk to an Opt11? My research makes me believe I only need that keycode if I want to share a voice mail.

OFC = IFC.

I started off with SL1 for that reason, but the BCM guy I am working with says he only has options for NI2, DMS 100, and ES55. I'm not terribly proficient at the BCM, but can you give me some info on activating the MCDN code? Or is this a Keycode they will need to purchase? Thanks, and other...

I have a customer with an Option 11 and they want a PRI from it to a BCM450. The PRI comes up and I can see all the channels & D-CH. Below is the build of the PRI, trunks, and D-CH. I'm not doing any digit manipulation, but have 1 range of numbers pointed to the PRI. When I dial a number...

Check the TGAR on the phone your testing from. If its set to 1 you will get a busy. If thats the case I would remove the TARG 1 in the RDB.

I've got an Opt11 that I have programed a PRI for interfacing to a BCM50. The span is not comming up, anyone know how this should be programmed?

I dialed in and didn't see anything before heading out to the site. As it turns out the customer experienced a brown out and some of there network equipment failed effecting the IP sets. I doubt the digital sets ever had a problem.

I have a customer who is telling me they can not make calls internally from 3904 sets to other 3904 sets. They also say they cant make internal calls across any of there IP sets. I can think of reasons why IP sets might have that problem, but what might cause this with the digital sets?

Thanks for all the feedback. Was able to get to Element Manager with your help.

ok, whats the best way to find the TLAN IP address in a system thats up and running? I believe its 4.5w and not sure right off what sig server they have

HOw do I get to the Element Manager on a CS1000M? Is it software that needs to be installed on a PC somewhere or is it on the CS1000? Thanks

Thanks guys

I've misplaced my PCMCIA card and Compact Flash. Will any Compact Card flash work in a CS1000? I've got to upload a deplist and in a bit of a jam

I've got a couple of Siemens/rolm 9751's that I have to do a backup of them and there VM. one is mod10 and the other is mod 50. What all do I need to get this done? Thanks in advance lm