Search results for query: *

While attempting to change a Route NO. on an extension in a HICOM300E using LC-WIN, I get the error "Cannot change network number to local number because the number is still referenced by AMO-DEST as a call forwarding destination" I can access Direct AMO Dialog thru LC-WIN. Is there a way to...

Thanks all. I believe I have what I need.

Thanks for the info TTT. Sounds like the 016 MLX is the largest capacity board available. Regarding the Merlin Magix processor if installed, is there anything other than a data conversion required? Can the Legend cabinets support a Magix r4.0 processor? No ATL cards are installed.

Hello, I have a customer with a 3-Cabinet Merlin Legend, CKE4 processor, R7 V9.0. The system is full of 408 MLX cards and they need more capacity. First, can a 024 TDL card in a clamshell be used in a Merlin Legend system? There is space available in slots 16 and 17 of the 3rd carrier if the...

Please disregard this post. I read that the personal line must must have the Principal User Extension set for proper coverage. Changed Principal User Extension to x36 and all is well. Thanks, thackney

I am trying to set up a Merlin Mail mailbox to take information from callers to a specific line(807)on a Merlin Legend R7. When customers call in, the line rings at the attendant console, who has the option to answer and transfer to the mailbox x34 or to let it ring for the mailbox to pick up...

Many thanks PERRYPJ!!

I normally administer a ROLM Phonemail remotely using Procom Plus. Today, the phonemail is answering but not giving a login prompt, just a blank screen. The Phonemail system is physically located some distance away. Is there some command that will get Phonemail's attention and show the login...

OK, thanks. I will try remote testing. Job site is about 75 miles away.

TTR test is probably a good idea, although I have done it in the past. I know how to test using a telephone. Is there a way to test the TTR's remotely.

No ATA to change. This is an IATA, internal on a CICS. No lines associated with the extension 37. It is to be used for an external ringer, but there is no ringing current on the port to activate the ringer. If I call x37 using the intercom, there is no ringing current.

Using WinSPM 9.0. Let me clarify my original post. Works sometime with SPM but usually not on the first few attempts. I get the same results dialing in with a TT telephone or a cell phone.

Using the internal modem on the processor board.

I just put a butt set on the IATA to test it. It gets dial tone and can make calls. Calls to the IATA x37 do not ring into the buttset. However, clicking to answer on the buttset will answer the call. Is there some setting to turn on ringing for the IATA or do I have defective equipment...

I have a Magix R4.0 site that has intermittent issues with breaking dialtone when calling into the Remote Access number with SPM. The call progresses right thru the digit sequence and never breaks dialtone. I used to think it was the CO trunk, but we now have a PRI and the issue remains. The...

The attendant didn't indicate anything on the screen. Just the short alert tone when a call transfers into the voicemail group.

A customer gets a short ring at the QCC console everytime a call transfers into a voice mailbox, whether a direct transfer or call coverage. Merlin Legend 7.0 with Merlin Messaging. Any thoughts on how to silence the console ring on voicemail transfers. Thanks, thackney

Thank you for your reply SYQUEST. The customer is not interested in adding another QCC at this time. Following are the PRI and OPERATOR reports you requested. ----------------------------------------------------------- A PRI INFORMATION A Slot 1 Switch: 5ESS A System: By...

A company I support just converted their copper lines to a PRI. There is no DID and all incoming calls are answered at one QCC position. In the past a MLX16 phone provided backup to the console via a delayed-ring Personal Line button for Pool 70. This arrangement no longer works. What is the...

merlinman, The 007MLM finally just faded away and would not boot. I replaced it with a Merlin Messaging R4. Everything seems to work fine now except when I try a backup to the port card. The backup starts and I hear the message that the process can take up to 20 minutes. Several seconds...