Hi i have installed a new CallPilot mini with 11c rls 4.5, It worked ok but after 4 weeks i am getting strange problem with a single mail box, when i try to access that mail box an error message heard "MailBox is already in use" how ever i am sure no body is accessing this mailbox beside me.
Any...
I reinstalled OS from scratch also with no database and it still gave same error,Tried cleaning Dongle also.
Yes i downloaded Keycode from Website and also got Blue keycode sheet from Nortel and System Id`s are same.
I am not sure about Daughter board NTTK13/25. I dont have these D/Boards. Still...
Hi i have a M3904 set on which there are 2 DID numbers are programmed on Key1 and Key2
Key 0 SCR 4240
Key 1 SCR 4233
Now customer need to forward key 1 calls only? i mean some times he use to be at some other extension and before going to other ext he wants to forward his key 1 only on that...
Hi all i upgraded a release 4.5,11c,SSC to release 5. There were some digital ISM, PCA and 2 packages upgraded, Upgrade was successful and keycode validation was also successful but after rebooting and few minutes i got error message " Security device not found or missing or security device have...
Thanks for the info, but am not understand what should i do with that extra MGC, any advise in this??
Ok i am planning these 9 PRI cards as
(a) 3 PRI card in first cabinet==> 4 0 4/4 0 5/4 0 6
with clock controller on 4 0 4.
(b) 3 PRI in 2nd cabinet==> 4 1 4/4 1 5/4 1 6.
(c) 3 PRI in 3rd...
I designed that system through Noretl Enterprise configurator, and i dont know why that extra MGC for? it is a 4 cabinet system.
Can i distribute these PRI cards in all 4 cabinets?
Regards
Hi all i got a cs1000e rls 5 to install at some time. The system configuration is as follows
MGC cards=05
CPPM SS =01
CPPM =01
SIP Trunk=32
IP user =25
Analog ext=192 (12 cards)
DLC user = 32 (2 cards)
PRI cards =09
call pilot 600 r.
It has 4 cabinets (11c cabinets).
Now i need advise in...
Here is the info
ELAN=10.10.10.x/255.255.255.0
CLAN=10.10.9.x/255.255.255.0
Gateway=10.10.9.1
I doubled check the IP info today and they seems to be OK.Any more advice.
Regards
Hi all, I have 20 IP users already but no IP extension configured yet. Default gateway is configured(dummy, i mean there is no physical gateway in our LAN so i used a dummy IP for gateway). DO i need DSP in each MGC for pure TDM ,i mean DLC and 500 ext phones??
As far as the question asked why...
Hi, it is CS1000E rls 5 with 3 cabinets. I have configured this system, All MGC are showing correct loop configuration and all VGW channels/DSP ports are showing registered, patches are also updated. It s a analog/digital Mix extension PBX with no IP extension configure. Within cabinet all ext...
Here is the procedure which i am following for upgrade.
product-->comm server 1000-->qote activity-->upgrade and expansion-->existing system type-->CS1000E-->Serial no of pbx(298811547)-->then select download-->it shows summary-->then select go then it ask for opi...here i got stuck
take cares
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.