scs5000
Vendor
- May 4, 2008
- 23
Hi all i got a cs1000e rls 5 to install at some time. The system configuration is as follows
MGC cards=05
CPPM SS =01
CPPM =01
SIP Trunk=32
IP user =25
Analog ext=192 (12 cards)
DLC user = 32 (2 cards)
PRI cards =09
call pilot 600 r.
It has 4 cabinets (11c cabinets).
Now i need advise in some card slot assignments and extra MGC.
(1) How do u advise card to slot assignments? in which
cabinet and slot i distribute these analog and DLC
cards.
(2) What about extra MGC cards? in which slot or cabinet do
i use this MGC? and how do i programme 2nd MGC in a
single cabinet.
I will be thankful to you if you guide me in this. I installed a couple of CS1000E with some small configuration but need some help in this big configuration and extra MGC settings.
regards
MGC cards=05
CPPM SS =01
CPPM =01
SIP Trunk=32
IP user =25
Analog ext=192 (12 cards)
DLC user = 32 (2 cards)
PRI cards =09
call pilot 600 r.
It has 4 cabinets (11c cabinets).
Now i need advise in some card slot assignments and extra MGC.
(1) How do u advise card to slot assignments? in which
cabinet and slot i distribute these analog and DLC
cards.
(2) What about extra MGC cards? in which slot or cabinet do
i use this MGC? and how do i programme 2nd MGC in a
single cabinet.
I will be thankful to you if you guide me in this. I installed a couple of CS1000E with some small configuration but need some help in this big configuration and extra MGC settings.
regards