Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Problem with virtual-access with 4 DSL's
Thanks for your reply, it was 2 different wic versions. Thanks Again Tommy -
-
Problem with virtual-access with 4 DSL's
Here is my debug info: both wics are the same *Mar 1 05:36:14.188: dslsar_tx_status_ind, last_tsi_idx = 251, tsi_tcq_map_idx = 255 *Mar 1 05:36:14.208: dslsar_tx_status_ind, last_tsi_idx = 155, tsi_tcq_map_idx = 159 *Mar 1 05:36:14.857: dslsar_tx_status_ind, last_tsi_idx = 255... -
Problem with virtual-access with 4 DSL's
DSLrouter#sh int ATM0/0 is up, line protocol is up Hardware is DSLSAR (with Alcatel ADSL Module) MTU 4470 bytes, sub MTU 4470, BW 256 Kbit, DLY 2000 usec, reliability 255/255, txload 57/255, rxload 7/255 Encapsulation ATM, loopback not set Encapsulation(s): AAL5 AAL2, PVC mode 23... -
Problem with virtual-access with 4 DSL's
I am running a 2650xm with 4 DSL lines. the first 2 are working, and the last 2 won't create virtual-accesses for the atm ports. The CD lights on the second 2 never go solid. the first 2 stay solid. I have checked the lines with modem and they sync up correctly. Here is my config: Building... -
2650 load balancing DSL's CHAP pppoa
Here is a copy of my new config and it works for one dialer but not both. when i do a show int summ dialer 0 works and dialer 1 does not. when I do a sh int the virtual-access3 comes up and down. But, when I ping the ip address of virtual-access2 I get constant replies. so the DSL of that VA is... -
2650 load balancing DSL's CHAP pppoa
also It won't let me put in both ip nat inside statements. When I try to put in the second on, it replaces the first one. Thanks Tommy -
2650 load balancing DSL's CHAP pppoa
Shouldn't I get a connection with one int even when the other is down? -
2650 load balancing DSL's CHAP pppoa
The dialer IP addresses, is this the static ip that was given to me per port, or was that the default gateway of these ports? Thanks Tommy -
2650 load balancing DSL's CHAP pppoa
here are the results. Thanks DSLrouter(config)#int dialer0 DSLrouter(config-if)#no shut DSLrouter(config-if)# *Mar 3 02:16:49.324: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state t o up *Mar 3 02:16:49.324: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state t o up *Mar 3... -
2650 load balancing DSL's CHAP pppoa
no can't ping google from router. Here is sh int DSLrouter#sh int ATM0/0 is up, line protocol is up Hardware is DSLSAR (with Alcatel ADSL Module) MTU 4470 bytes, sub MTU 4470, BW 256 Kbit, DLY 2000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ATM, loopback not... -
2650 load balancing DSL's CHAP pppoa
Here is the new config Building configuration... Current configuration : 2154 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname DSLrouter ! boot-start-marker boot-end-marker ! enable secret 5... -
2650 load balancing DSL's CHAP pppoa
mine is a 2650xm. The virtual-access2 and 3 or down all other interfaces are up. Thanks Tommy -
2650 load balancing DSL's CHAP pppoa
This is my atm status DSLrouter#sh atm pvc ppp VCD / VA Peak Avg/Min Burst VC ATM Int. Name VPI VCI Type VA St SC Kbps Kbps Cells St 0/0.1 4 0 35 PVC 2 DN UBR 256 UP 0/1.1... -
2650 load balancing DSL's CHAP pppoa
what version do i need? and what router is yours on? and what is the total dram needed. Thanks Tommy -
2650 load balancing DSL's CHAP pppoa
here is the sh ver Cisco IOS Software, C2600 Software (C2600-IPBASEK9-M), Version 12.4(19), RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Fri 29-Feb-08 19:23 by prod_rel_team ROM: System Bootstrap, Version... -
2650 load balancing DSL's CHAP pppoa
Router is a 2650. I will post a sh ver. Thanks -
2650 load balancing DSL's CHAP pppoa
it won't let me type dialer-list 1 it chokes on the list part when I do a help it tells me that the only dialer option is dialer-group. Thanks Tommy -
2650 load balancing DSL's CHAP pppoa
Thanks Burt for the post, I noticed you put a ppp pap statement and I am using chap. Also you used pppoe and my isp uses pppoa. I am a cisco switch guy, so I appreciate your post and patience. Thanks Tommy -
2650 load balancing DSL's CHAP pppoa
No output to the internet. the interfaces are up, up. but can't get out to the internet. It has 2 wic adsl's. Thanks Tommy
