Thanks hawks it worked. But i have one more question some of the users are members of od Pool C(VoIP lines).
I was using destination code 8 to access pool C. to get 8 working again i had to remove 8 from destination code and add it as access code on Line Pools so when i press 8 i'm going out...
Hello,
I have 5 ISDN lines in Pool A and i use routing with 9 to access Pool A.
Now i've added 1 more ISDN and set it to Pool B and added the DN's that need to go out using only that pool. But now when those DN's press 9 i want them to go out from Pool B, but i can't add 2 pool's in 1...
Hello,
We have Email and Web Security Appliance (3100) v5.0 which is configured as transparent bridge. Everything works as it should be for the web scanning, but the we have problems with the smtp.
We have managed to set it up to send and receive mail, but our problem is that we have a...
Hello,
I have ipLDK 100 with analog phone lines CLCOB8 with CIDU8. Just for testing i've set CO Ring Assignment to Station 100 which is LDP-7016D.
When i call from outside i'm getting LINE 01 or LINE 02 but i want to see the number that i'm calling from.
So, is there any setting where i can...
Hello,
I have a web application that is running on Windows 2003 and SQL 2000 with ASP .NET 1.1.
Now we want to migrate it to a Windows 2008 and SQL 2005 because i can't run SQL 2000 and Windwos 2008. I've managed to install .NET 1.1 and SQL 2005 and migrate the databses from SQL 2000 to SQL...
When you do the things quick you will always spend more time to figure what you have done wrong :)
The thing was i've forgoten PGM143 ISDN ENBLK Sent to set it to ON.
Regards,
Nikola
Hello doctor,
I want to connect ipLDK-20 to a SIP provider(public). I don't use IP Phones i have 1 digital and 6 analog phones.
Thanks for the fast responce.
Regards,
Nikola
Hello,
I'm trying to set VoIP access on ipLDK20 and i've used doctor's thread about VoIP trunk in ipLDK100 and it worked on ipLDK50/100.
The thing is that everything is setup as it should i can receive a call from the VoIP lines, i can see the register packets on the VoIP server but when i try...
Thanks dude,
I'll try this and let everyone know what i did, we don't have many faxes we have only one fax number and we have a person who is doing the forwarding at this moment, most of the communication is over mail but as we all know we have to keep the fax service.
About the hard copy, now...
Hello,
Yes, i want to have my mail to one location and not have them on a fax machine but i electronic form.
At this moment we are using Fenestrae Faxination Server which was installed a long time ago. The service sends all faxes to a public folder on our exchange from where a person is...
My setup is like this:
I have phone number 3090100 to Physical Line 155 which is my fax number. I have a testing keyset (IP Phone 2001) with DN 201 and using Target line 472. I'm doing the changes on voicemail 201 which is subscriber because i can't find that option if i choos Fax on Demand...
Hello,
i have BCM400(rel. 4.0) and i want to use the fax services to be able to send the faxes to a public folder on my exchange.
I have 1 Fax Suite keycode and 16 UM keycodes. I've looked into the callpilot but i can't find something like this.
Can someone guide me where to start with the...
Hello,
I'm trying to connect ipLDK100 with a SIP provider for VoIP calls i have added user and pass in sip attr2 and the sip hostname in sip addr 1.
I can see some register packets but when i go out from the lines that are used by the voip cards i can't make a call.
Can anyone guide me how to...
Sorry for the late answer, the thing is when i press flash *70 the call is not on hold and i'm not getting new line to dial the new ext.
I've managed to set the wifi DECT's and i've ordered a few more, but it would be nice if i can use the old ones until i get the new DECT's.
I'll try tomorrow...
Hello,
i have 2-3 analog panasonic dects and one linksys cit300 from my old setup that i want to use on my new BCM400 install. They are hooked as analog phones and they work fine, just when i try to transfer a call when i press the FLASH button it's not recognized.
Browsing the forums I've...
Thanks the problem was that the lines ware set to Auto and the operator was answering the call automatically. When i set it to Manual the Auto-Attendant was answering the calls.
Thanks
Hello,
I'm having a BCM 400 auto-attendant problem. My lines are set to goto auto-attendant after 2 rings, auto answer is enabled and almost every think i could find on internet, but when i place a call it's going to the attendant or operator first i have the attendant and operator at the same...
Thanks Brat,
i got it working before i read this forum but you are right, on my 221 i had non existing ip as wan default gateway (it can't be blank) because i was thinking it going to route the packets to the ip of the remote router (on 1010 there is a branch office routing table) but on 221...
Hello,
i've successfully managed to create a Branch Office VPN tunnel where 221 is initiator and 1010 responder. Compression is disabled and i use IPSec DES-MD5 Group1.
There is always a "BUT" here :) i can't get any traffic to go trough the tunnel, i'm trying to ping a hot on the other site...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.