Can you WR memory on the switch. I had a issue like this before. Were I could not see the running config, but I also could not write memory. It was a software bug. My fix was new version.
Are the two routers PTP? Is voice the only thing going over the leased line? If the two routers are connection via PTP they need to be on the same network. Also if you are running data and voice of the leased line you will need some form of Oos.
Currently I have a ASA 5510 with one outside interface. All my internet traffic goes out this interface plus I have static nat translation to internal servers. Also my vpn clients connect to this outside interface. I have recently added another ISP connection to my location. I want to use this...
When I have a power outage. The power comes back on then switchports that have devices in use do not work. I can change the port that it is connected to and it works. After about 10 mins I can plug the device back into the port that did not work and it will be working again. Is this something to...
New in CUCM.
Can anyone tell me were in callmanager can I find my receive digits for my incoming Pri. The Pri is coming in on a Mgcp gateway if the PSTN were sending me 7 digits where would I tell the callmanager that is whats happing.
Having trouble getting nexus 5000 series to authenticate with radius server. I have done other switches in the past but the nexus seems a bit different. Here is what my config looks like.
Here is a config on a working non nexus switch
aaa new-model
aaa group server radius ias-local
server...
We are using 4500 switches we have tried all lldp configs how do you get the shoretel phones to work with LLDP-MED. WE are having probelms with the power consumed.The switch shows that it is using 15.4 watts, but the documentation from shoretel says the phone only uses 7.1watts. Does anyone know...
Here is some more info on the probelm.
My probelm is that the shoretel phones will not come up unless I hard code the mgcp voice switch that needs to controll it in the phone. If I do not hard code it it will get the correct ip from the voice Vlan but it will not come up. I have a dchp...
Hello,
My probelm is that the shoretel phones will not come up unless I hard code the mgcp voice switch that needs to controll it in the phone. If I do not hard code it it will get the correct ip from the voice Vlan but it will not come up. I have a dchp server configured with option 156. and...
I have a shoretel phone going to a cisco switch. The only Vlan on the this switch is the voice vlan. should I set my switchport mode to trunk or access for the shortel phone.
I can not figure out what is causing my probelm.I have an 1861 Intergrated Services Router, running 7.1 Cisco Unified Communications Manager Express, My Ios is Version 12.4(11r)XW3.This Router is tied back to a 2851 which is my gateway back to a Nortel option switch, Via Metro Ethernet. My...
I have an Avaya ip small office works like a partner no ip phones.The incoming trunks are all analog.The trouble that I'm having is that when an incoming call is connnected I can here the callers but the callers can't here me.Acting like one way transmission,any Ideas would be helpful. I have...
My probelm is when calling the pstn line that is connected to my fxo port when the call is not pickup the phone keeps ringing and will not disconnect. Here is my voice port config.
sho voice port 0/1/0
Foreign Exchange Office 0/1/0 Slot is 0, Sub-unit is 1, Port is 0
Type of VoicePort is FXO...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.