I'm attempting to latch on to an SV8500 that we recently acquired with a merger. I haven't been able to find the PC Pro disks anywhere. Is there a public download available, or is it a licensed product? Thanks for any assistance.
Greg,
I reversed the tip and ring on one of the ports and that didn't affect it. I did have a breakthrough today, though. The system originally had 2 NT8D14CA cards. I located an NT8D14AA card and put in and it worked. Why would an NT8D14CA card not work all of a sudden when the original...
I patched the system fully this weekend. Instead of having ATDN for the loop start lines as the auto-attendant, I forwarded it to the switch-room phone. The incoming calls on the loop start will ring at the switch-room phone (M3902), but when you answer the phone, it's dead air. The calling...
Update - The line as still ring-no-answer. The busy signal was because someone was on the phone I had it routed to :)
I just called the trunk below and TRAK'd in in LD 80. Here's what we get:
DES ANLG5
TN 003 0 00 04
TYPE COT
CDEN 8D
CUST 0
XTRK EXUT
FWTM NO
TIMP 600
BIMP 3COM
AUTO_BIMP...
GHTROUT,
That's correct. I tried running the card in both cabinets as well, just to see if it made a difference.
Before, the numbers were ring-no-answer when I would try calling them. After a long night of fighting with this thing, they now ring busy. I assume this changed during one of the...
I have two Option 11 Minis with the same problem. One is release 3.0 the other is 4.50W (both have DSN software). They are located in grocery stores and have 4 or 5 analog trunks (Loop Start) along with a paging system (also Loop Start). All of a sudden, the universal trunk cards have no...
The problem has also spread to a 4.50W DSN switch, so I'm going to open a separate thread to see if anyone has advice. I appreciate your help firebirdscambler.
It's in the US, so it would have to be the na-cala_300_r17.exe. The only catch is that it has to have the DSN feature set in it, since it's a military switch. The normal 3.0 software would allow me to use the keycodes.
Does anyone happen to have a copy of the Release 3.0 DSN software for an Option 11 Mini SSC that they can spare? I have one that has decided to go crazy.
Here is the the config of the system where I attempted to set this up.
GENERAL TRUNK INFORMATION
QCC QCC Extern
Trk SS/PP RemAccess Pool TlPrfx HldDisc Principal Prty Oper Switch
801 1/ 1 No Remote Yes Long 10...
Is there any way to make a Legend 6.1 system automatically put a call on hold after 4 or 5 rings? The system is a key system and the three POTS lines are distributed as personal lines on the two stations that need the automatic hold. I was looking at changing the stations over to QCC, but it...
Can you use delayed call forwarding to send the call into a park slot, then assign a button on the phone to monitor the park slot and retrieve the call?
Could I do the following:
1) Create three bogus extensions (let's say 7101, 7102, 7103)
2) Create three separate calling groups (755,756,757)
3) Set up group 755 with extension 7101 as a member and assign it to line 801. Set up group 756 with extension 7102 as a member and assign it to line...
I currently have a customer that is a fairly large restaurant with a Merlin Legend 6.1 and they have two receptionist stations (10 & 11) and three incoming POTS reservations lines (801, 802, and 803). They want all three of the POTS lines to ring on extensions 10 and 11 simultaneously (which is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.