Search results for query: *

sx200 ml that is unable to transfer does anyone have a good basic cos for a 4025 phone during a call when you press the transfer button nothing is happening figured i missed something in my cos for it thanks Old Dog learning new tricks

unfortunately i do not have the form 55. I found i could use the abbreviated dial form to make this work, I just did not know how to put in the abbreviated dial access code into the string, just discovered how and its good. I dropped the digits received to 3 and added the abbreviated dial...

I tried that and I have a conflict because there is a room 1001.

Hello, working thru a PRI install on a ML. receiving 4 digits from telco, they are the last 4 of admin ext's so that is an easy one but the main number is not in the range. its 1001, so i tried in form 15 to set N to 4 and m to 1 so the system would send on 3 digits. Then in abbrev dial i set...

I do see some type of error of smdr. I also get a loop back error. Can i turn off smdr printing?

Well, I made sure to give it a common ground and switched cards and same result. The system thinks all of its lines are in use and give you a busy signal when trying to access. The line card is not lit up as if it has them off hook and I can get dial tone from the lines by access them directly...

Verified that polarity if ok, able to go off hook on all four lines thru the console and get dial tone and dial out ok. The system will work fine for hours after a reboot. But later on it seems to not be able to hang up the line. When I return i find all 4 lines are unable to be reached thru...

1 confirmed they are 3 ground and one loop, I wonder if changing polarity might effect?

Oh my! Just read what siri posted! Off hook, off hook. Sorrrryyy

I have an sx-50 That has three ground start trunks going into it and a fourth loop start. All of the four outgoing lines after a period of time stay off fuck and will not release the calls. When trying to access and outside line you are returned a busy signal at the console. After a system power...

our ext's now start with 5 and the new did's are starting with 4 the table is used up with random redirects of the old did's not going to the exact match ext. dont ask me why.... I thanks for the info on how to change the park code I am attempting it today. btw here is our dial plan...

we are at 4 digit extensions, 4 digits coming in from co. I will post dialplan shortly.

Yes, the DID's are coming in from a PRI, I tried the add/remove digit field and almost all 16 entries are being used already. Can I not change the park code? Dan

Hi, I am trying to add a new range of extensions starting with a 4, due to a new block of DID's added. system will not accept, current extensions start with 5. The only conflict I can find is the park orbits are 2 digit numbers starting with 4, like 48, 49 etc. Could this be my conflict and...

The one thing I did not do is try to access the line while it is ringing, even though it does not ring on set I should be able to answer it by accessing it. I am not at site now, I will try this later today. Not sure of software vers. I will be back with more info. Thanks much all for the...

hmmm it id's as 31 -34 I will try that.

No, I have 6 lines. No matther which line I punch onto 31-34 I get no ringing, I can access them and call out but you dont even hear the slight click of the relays when you are calling in on those lines, you hear that clicking on lines 1-4. Dan

Yes did that, all lines ringing my butt set fine.

I have a MICS that I thought I had a bad line card and have since replaced ls/ds card. Has anyone heard of the 2nd slot going bad like this in a mics. I can access lines 31 & 32 call out on them fine, but it will not detect a call coming in. Lines are set to ring on station, but not appear...

uh-huh that explains it. thanks.