I am involved with the deployment of a Cisco Call Manager system and some of the phone are 7841s. This is the first time I have deployed the 7841s and a strange issue is coming up. About 50% of the phones I have to manually go into the phone and turn on auto negotiate on the PC port so a...
Yes we installed a CC card on the new PRI card in the Opt 11. We even changed it out with a known good one.
The provider is not "Providing' a clock source. It is supposed to be a dry point to point circuit and the 81C should be providing the clock source. Besides, when we turned up the new...
I am having an issue with a couple of PBXs with PRI clocking and looking for guidance.
I have an 81C connected to an 11C via a Nortel Passport routed circuit. This has been up and running like a champ for like 12-13yrs or so. Anyway, when you are using the Passport "Cloud" and having the...
I have been a Nortel Meridian tech for the past 10 years and just starting my transition to data and VOIP. I just passed my cert tests for CCNA and plan to eventually get my CCVP. I see that CVoice 6.0 is required for CCVP and now gives you CCNA Voice cert for passing it so I will be starting...
The strangest thing happened this morning. I fired the routers up to capture the information and the serial link came up up. I was able to ping from one to the other as well. I did not have time to play too much this moning but I will program in the vtys and try telneting from one to the other...
Hi all, I am fairly new to the Cisco world and am looking for a little help. I have a buddy that lent me 2 C2620s with WIC-1T cards. I bought a DTE to DCE cable and hooked it up. I built all the interfaces and yet can not get the serial link up. I did a very basic build with just the ip...
When the music is playing over the PA, you can do a trace on that tn to find out who is doing it. Go to ld 80 and type in trac space and the tn. It will give you the tn connected to the paging tn.
Bumping to get back on page 1.
I am really looking for any help with this. The cust runs the passport and it is hard to ell them their setup is screwing us up.
Every once in a while if you have a flaky phone, it will not read the serial number properly and you have to go into Ld 50 to manually input the serial number. Real pain when it happens.
We were recently trying to replace an Opt 11 Compact with a new Opt 11 Mini and were not able to get the clock to lock to the pri.
A little background....This PBX is tied into a DS1V card in a Nortel Passport which combines the voice and data for this site on a single T-1. We have done every...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.