Search results for query: *

The Port24 is configured as VMail port on Program 117. On program 118 ports 24-1 and 24-2 have assigned the ext 165 & 166. Is a requirement connect the TD1232 to TVA50 to access the VMail via Maintennance Console?

I´ve a KX-TVA50 connected to a KX-TD1232 but suddenly the alarm Led turned ON and I can´t connect to the VMail via USB (Is the only way that I have to connect). The VMail doesn´t work either. The Alarm LED turned ON after I reconfigured the KX-TD1232 (I sent the Phone System to default...

Hi guys the problem has been fixed following your recommendations. The VWIC2 card was activated via CLI using the command card type {e1 | t1} slot subslot. The SDM software doesn't support the VWIC2 cards and all config must be done via CLI. Thanks all for your help, this forum really works

Thanks for your help guys, I talked with Call Accounting Tech support and they will create a special confiuration for Missed Calls from Avaya IP Office. Thanks again, this forum really works

Someone can help me to activate a VWIC2-1MFT-T1/E1 on Cisco 2801 with IOS ver 12.4(1c) and SDM ver 2.3.1? The problem is: 1. If I try to configure via SDM, the card is "UNRECOGNIZED BY SDM". 2. When I access via CLI and run the "Show Interface" command, the VWIC card is not displayed. I tried...

I configured one Extension on Voice Recording Section and works fine. One more question. Do you know how to change or customize the warning message? Thanks for your help

I need to record phone calls from Customer Service Dept. Can I do that just configuring the equipments or I need a specific software? I have an IPOffice 412 Rel 3.2 (54)and VMail ClientPro ver 3.2(28).

I have the Call Accounting Mate software installed and working with avaya IP Office412 but no Missed Calls are displayed on Missed Calls Reports. Can somebody let me know how to identify missed calls on Delta Server 5.2.24? THANKS

The issue was fixed installing 5_2_24 Delta Server. Thanks for your support

I have an IP Office412 Ver 3.2(54) working with Delta Server 5.0.33. When I review the SMDR entries some calls have wrong date and I can't generate a Missed Calls Report on Call Accounting Software. This is an entry example: 1899/12/30 00:00:00 00:04:48 2 7322 O 7323 7323 1 452 0 E7322 Vicky...

Hi guys I hope you can help me. I have 3 Cisco Routers (2-2801 & 1-1841) working, and 3 Multitech VoIP equipments (2-MVP2410 & 1-MVP810). The Mutitech's are working on my old network and I need to connect them to CISCO network. What I need to configure on CISCO routers? I contacted to...

The Route in Firewall has been modified from 10.6.9.1 to 10.6.9.30 and I can ping Pc's in 10.6.0.0 since 10.7.0.0, but I haven't internet access in 10.7.0.0 What should be the DNS to use on remote site (10.7.0.0)? Need I to configure a DNS on CISCOS?

I have a route in the firewall pointing to 10.6.9.1 (current working ACTMultiplexer NIC card) I'll change this route to 10.6.9.30 and I'll test

The config is: R2 (REMOTE) version 12.4 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption service sequence-numbers ! hostname...

Done but we have same status

With this new static route I have acces to internet and I can ping to ip 10.6.9.2 locally, but I can't ping to 10.6.9.2 from 10.7.0.0. I tried this From 10.7.0.0: tracert 10.6.9.30 and I arrive to 10.6.9.30 tracert 10.6.9.2 and I just arrive to 10.10.0.1 (S0 from R1) I don't know why but I...

Hi guys, I need to install 2 CISCO routers (R1=2601 & R2=1841) via T1 and SHare the DSL internet connected via Lan from R1 to R2. If I config the f0 IP address as PC's DGwy I have access from 10.6.0.0 to 10.7.0.0 networks but I can't ping the FWall NIC Card (10.6.9.2 current PCs DFGwy )and no...

I configured the BCM via IP but I want to know something: Is possible to configure BCM50 via Thelephone using Feature **Config ? If Yes: What's the default User ID and Password?

I have a MVP2410 connected via T1 card to NORSTAR System and a MVP810 connected via FXS/FXO to Panasonic analog ports.

Thanks!!! is working now