Search results for query: *

I some help with the fitness room phone being a ring down phone to the attendant when it is picked up. I have not worked on a mitel this old! They will be replacing the system this year but this is needed for the hotel to pass inspection. Some guidance would be much appreciated. Thanks in advance!

Currently IP Office 500 running 8.1.69 and trying to convert from regular t1 to pri and running into issues with Windstream rejecting the call. Pri is setup for NI2, I have set up the "no user" source number to NI2_CALLED_PARTY_TYPE=UNKNOWN and we are having no luck, played with the NSI and...

I will look at this when I am back on site, what I saw was on the system there was 4 rows of connections to make for phones and the 2 rows on the right side were for stations, the other 2 rows were for lines. I did not see anything labeled as A/B, . I will look more closely. Thanks TG

I have a customer with a Mitel 3000 that has bought a message on hold device and a=wants it connected to the system, with the connector they sent which is a LR5950 .06200 . I have plugged this into a digital port and programmed this port for external music, however no music is being heard over...

I have a defenity system with a aux port into a bogen multicom 2000 that works but is very low volume. Has anyone experienced this? It is setup using a aux port into the relay card of the multicom. Any help would be great. Thanks in advance.

I will check but I dont think that has changed.

I have 4 ip offices linked together using scn, currently they are all 8.1.43, all have the scn running for about 5 days now what the issue is that they cannot dial any of the extensions at those other sites. each unit has the trunk from each of the ip500v2 as well as the ip address of the 500v2...

I have been given the task on this BCM 50 of changing the ring of the 4 lines from 2 sets to 3 sets, I am not up to speed on the Nortel BCM 50 as I would like, is there something fairly easy with it? Any help would be great, I have changed the names, reprogrammed the buttons , etc, but it is a...

Bear with me I have inherited a bcm 50 and know a little on the nortel, I am trying to change the ringing on the 4 lines so that it rings a 3rd station, currently it rings only to sets and I need to change this to three. Any help would be appreciated. Thanks

Wandering if this has happened to anyone with ip office and nortel phones, what has happened twice is the the on a incoming call the console phone will just ring continously until you unplug the set, this has happened twice. Of course its when I am not around and no one else can really tell me...

It looks like I have a Hipath phone system with in the skin vmail, we need to set up auto attnd, currently it just has a recording in place. How hard is this to setup and activate? I have some experience in voicemails.

I have a 500 v2 with vm pro running the intuity mode, currently they have the main number going into hunt group, at nights this sends it to the auto attnd and it perfect, but during the day when the recep have to step away from her desk the system doesn't send it to the auto attendant, it just...

Okay, I went through the steps, and when the front desk hits the "night button" it doesn't go to the AA. Does it make a difference since this vm pro is in Audix mode? Thanks for all of your help

Wandering if anyone has a good way of doing this, I have the main number coming into hunt group then to one user in the hunt group. When she has to step away for any reason I want the calls to be routed as they are at night. Which goes into auto attnd and then gives caller option, etc. Is there...

Okay, I have the 4 digit dialing working now thank you, Is there a way to insert a 9 in there dial string so they do not have to dial 9, 9 to dial a local number from the legend system through the definity? Thanks for the help!

Here is what I have, Legend r7 with roughly 30 phones tied through a point to point t1 to a definity, I have set up the non udp routing table, if they call a extension 1001 it routes to the correct area the help desk(hunt group), but if they call anyother extension 2xxx,4xxx,7xxx, etc, the call...

Hopefully someone can point me in a direction to look at, currently I have a defininty tied to a legend rel 7 via a point to point t1, there is roughly 30 phones off the legend using udp, I have set up the legend for non udp routing. What is happening on the definity, is that no matter if you...

I have a ip office 500v2 - all ip, the main answer position has a 1616 with 2 - 32 button module on so she can see who is on the phones, etc,etc. The issue we are having, is that the activity light don't seem to match up when people are on the phone, dnd, activiated,etc. the buttons are...

I'm sorry, I did type this wrong it is a 5410 digital, and once you plug the set in it says please wait and stays there. I have tried to rest the phone but it doesn't seem to want to do anything.

firewall was turned off