Search results for query: *

Yes that does work. I have it working in the lab now. Next step is to make it work on the customer network with a VLAN. I read that LLDP doesn't work and I have to use DHCP with option 125.

I can't seem to make this work. When I use FAC #7 and the DN of the IP paging unit I can hear a relay click but no audio. I am trying this set up on my lab system before I go install it at the customer location. Any ideas???

Thanks for the disappointment! We had to key them all on one by one. Should have sold them a 3300!

Normally my company sells Mitel 3300. I am working on a SX200 ICP and cannot figure out how to copy keys to existing sets. The new IT person wants to change all of the keys on 90 phones. I see how I can delete them and build them back with range programming with keys, but I want to just...

Has anyone ever had this issue? Mitel 3300 CXi. Version 6.0 SP1 12.0.1.24 Customer uses park key with "4" as the hunt group to park against. PArk retrieve button "4" Sometimes the callers on park will be able to talk to each other. This is a medical office and they are concerned about Hippa.

Mitel MiVoice 7.0 SP1 PR1 Has anyone succesfully configured one of these Polycoms? The insructions from polycom.com are not any help at all. I have built an extension as "Generic SIP Phone". I am able to log into the Polycom, but I don't see where to put the SIP password.

I am using VPN with windows 7 and I tried Ubuntu. Neither works. I am missing something.

I see a few other threads here on this subject but none of the solutions worked for me. What I have is a 3300CXi running 6.0 SP3 (12.0.3.15). I have a public ip address off my routed network with no firewall in between the WAN port of the 3300 and the public IP from my router. I can ping...

Having them both tagged didn't work. Only when I untag the voice and tag the data on a port does it allow PC access.

Thanks everyone for the input. I now have it working. The solution was to make have a port untagged on the voice vlan (VLAN 2) and tagged on the data vlan (VLAN 1). I used port 16 for this because port 17 would not work for some reason with the same configuration.

All voice packets are tagged. All data packets are untagged. I'm pretty sure that all the switchports are in the default (out of box) configuration. I did play with tagging voice packets and data packets on port one and see if that would allow access. It didn't. If the CXi is set with VLAN...

I had this same thing on a CXi 6.0 SP2. What I found was somehow they were using "callback" and it makes the MWI come on. Try putting in a FAC for Callback-cancel.

I am building a new 3300 with MBG running 4 teleworker phones. Question: How do I log into the CXi without having to issue the "vlan_off" command? Mitel CXi is on VLAN 2, System IP is 192.168.20.2, DHCP is enabled. Data VLAN is 1 with a Windows Server 2003 using DHCP on the 192.168.17.xxx...

No, but I did have the option to set one to CSU and the other to DSU. I did try every combo and rebooted the PBX each time, still didn't work. Unfortunately the programming is not very similar to the 3300. v

Last week our customer had a HD failure on their 200 ICP. There was no backup, and I had to rebuild the entire database. It is a small hotel and I was able to get it up and working with one exception. There is another 200 ICP that is connected via PRI. I can't figure out how to sync the two...

The customer has cisco switches. I will tell the IT guy what I need. I do have option 125 in the range with all the options filled out inside of it.

And my problem is how to make the IP phones boot once the DHCP server gives them a lease. They are on VLAN 20 and the phone will boot up, then get a lease and say VLAN 20 PRI 1 1, and then reboot and just sit there. If I remove the vlan from my dhcp scope it works fine. If I manually tell...

I have a customer who was on a BCM50 and changed to an IP Office. They kept the same phones and I loaded the SIP firmware into the Nortel IP 1230 sets. Long long story short, they want the BCM50 back, but now I am having trouble reflashing the phones with the UNIStim firware. Has anyone...

The previous installer set this up for 3 digit dial and now the customer wants to use the group admin tool to make VM changes, which isn't possible without 4 digit extensions. The customer has a PRI and about 50 sets, almost all are 4025 Digital sets. Also there is a Superconsole 1000 that they...

Yes, after a power outage it appears that the hard drive is bad. It was one of three BCM50s that I take care of in town that died this week, we had two extended power outages. $$$$