Search results for query: *

Thanks parnum for the trick. I changed the adc dig 1 = 0 (immediate seizure) and made change in the nadap list. Since there is PRE which is dialing 161 in the starting of the number, i added that into the nanls. <roddp:dest=2&3; EXTERNAL DESTINATION ROUTE DATA DEST DRN ROU CHO CUST ADC...

Hi guys, I am facing a problem with the number length setting. I have set the length MIN=4 & MAX=4. But when the extensions dial the remote exchange extension numbers it starts dialing & sending signal immediately in 2 digits. <RODDP:DEST=2&3; EXTERNAL DESTINATION ROUTE DATA DEST DRN ROU CHO...

Dear XS As far as I understood, he want to land particular calls to specific extension 200, where there is 11 extension attached to that group. I believe, you have to cut down the last 3 number of the exchange number not the first 4 digits, and put 200 there so that the call will land on there...

a star from me too! BR Monro

hi satellite, Thanks for that setup. But the phones didn't take the vlan config and the new ip. however, it is taking all other settings like gatekeeper and stuff. I had to configure the phones manually... running to each desk :P BR. Monro

Guys, please help me with this: I have the config file as below for the VLAN port configuration: [L2QOS] PhonePort=6,1 ;prio (0-7) ,VID(1-4094) PCPort=0,2 ;prio (0-7) ,VID(1-4094) LANPort=0,0 ;MAC based VLAN/802.1Q based VLAN , untagged/tagged PC originating traffic...

Ok. create a group GHGRI:GRP=XXXX,LIM=X,SERV=10000,TRAF=15,SEL=110000,QUE=5; GHGMI:GRP=XXXX,DIR=3840&&3843; RODNI:ROU=8,NIG=XXXX,DAY=9; this is for the night time and off duty PELPI:DIR=9,ANSPOS=9,CHO=1,BSYCHO=2,TIME=20; PELPI:DIR=9,ANSPOS=XXXX,CHO=2,TIME=20; this is for busy operators XXXX...

Hi Since there is no much info provided, the best & easiest way to answer this query will be GHGRI: CAT can be 01 or 15 (since it is extn to extn transfer) GHGMI: RODNI: Or else, pls post GHDAP:GRP=ALL; give a clue abt voicemail grp if any RODNP:ROU=XX; etc BR Monro

Hey, Did you end the ED series in NADAP? because, i found in your post about ending a route DEST. NANSE:NUMTYP=ED,NUMSE=321; ?? BR. Monro

Hi from ALEX LROUID= Local route identifier. The parameter states a route identifier used to distribute the incoming H.323 traffic. Incoming calls are distributed to that route whose local route identifier matches the route identifier received in the call. At the same time, the identifier...

Hi dont u miss 2 digits in ADC? BR Monro

Hi jwhausk wrong place to post your request for help. This forum section is for AASTRA Regards Monro

thanks for the info Doktor

Hi, that Russian forum is something different! If you use a translator (google translate) it is nice. They share everything there, even licenses!! Btb, Otoni, sharing the copyrighted software is against the forum rules... isn't it? Regards Monro

Oh yes, there is something wrong. how many call processors do you have? post a "print screen shot" thru imageshack.us of each call processor. and you are right, after leaving the message, the call will be terminated by saying "thank you for calling".

Hi Njoro it is like that. after leaving the voicemail msg to the extension, the voicemail continues to play the greeting msg, to allow the caller to reach another extension, if the caller wish to. If the caller doesnt want to continue, simply hang the call. [at any moment] Regards Monro

Hi "Ericsson Communication Client" the soft-phone by the company itself Regards Monro

Hi did you make any search around here? there are a lot of threads here, about the configuration of E1 & analog trunks Regards Monro

Doktor, that website is in different language. It is not in English?

Coool man! I am happy that you did it by yourself! Thanks Doktor for helping him Regards Monro