Search results for query: *

I posted this reply to a Compaq user on this forum, maybe it will help you also. I am really not sure Ghost will recognize the RAID HBA. The best issue is to use NTBACKUP (>start >run >ntbackup) and use "backup entire system" to an external drive (prefer an IDE or SCSI drive), create recovery...

hummm... are 700mhz processors compatible? the proliant 5500 runs on 100MHz FSB processors only..maybe your 700 procs run on 133MHZ FSB? I think the plastic stoppers you got rid of were there to aid in differentiation of correct processors. Try to boot with original processors, or, as TheLad...

I am really not sure Ghost will recognize the RAID HBA. The best issue is to use NTBACKUP (>start >run >ntbackup) and use "backup entire system" to an external drive (prefer an IDE or SCSI drive), create recovery diskette (will ask you a diskette at the end of backup). Then install RAID...

The first step is to find out what RAID controller you have installed in the server. May it be a SmartArray 3200, 4200... or something like that?

[RESOLVED] I finally discovered that the SCSI cable was faulty. I replaced it and everything's fine now.

TheLad, what to you mean by IMO ?

Hi huhejars, What is your SmartArray controller? Is it an Integrated SmartArray controller (on a small SODIMM-like slot)? Or are you using a PCI controller (like SA5300, SA3200...)? I had exactly the same problem with an ProLiant ML370 G1 server some time ago (same M/B as DL380 and CL380), but...

Hi! I just got an old Compaq StorageWorks 4214R Enclosure, in an excellent state (like new) but no drives. I filled the box with 14 genuine Compaq/Fujitsu 18gig hard drives, all tested OK (was using them fine in my ML530 and DL380 Proliant Servers), attached the array to a SmartArray 431 RAID...

What is your Storageworks model? Is it a 4214R/4314R? Most Storageworks Enclosures must be attached to Compaq SmartArray Raid controllers if you want to use all entire functions on the enclosure, like the drive LEDs, but It will run fine on any other RAID controller (you may not have the correct...

Hi everyone! I a looking everywhere for Windows drivers for the Agilent Tachyon HPFC-5166B Fibre Channel controller. It seems it is IMPOSSIBLE to locate them, even though on the quickspecs it was stated windows support. I dropped on an IP4700 Clariion disk array with Longbow motherboards (the...