Search results for query: *

406v2 3.2.69

I have a couple of remote workers on VOIP phone, everything seems to be working fine. I now need to add the IP phone to a huntgroup for covering a few hours per day I added the user to the huntgroup but when everyone at the local office is logged out or DND and the IP ext is on and enabled in...

I was pinging router to router and router to server as well as server to router, but it seems I fat fingered an IP a fresh set of ehyes on the config seems to have solved my VOIP problems but still not unable to to ping "all the way around".

Thanks for all your input. It seems that the firmware for 4621sw that comes with 3.2.69 doesn't play well with H323 security inspection on Sonicwall NSA appliances. So after tracing packets and snooping for days and days it came down to the fact the H323 transformation setting on the Sonicwall...

I have a 3 site setup Site A is the hub connected to Site B via VPN and Site C via PtP T1, I can use all network services across all 3 sites except that I can not ping from Site C thru to Site B (Site A and B can ping Site C) When I try to ping a server at Site B from the router at Site C I...

I'm trying to trouble shoot a VOIP phone with a vendor and am having trouble and sick of arguing about ping response. I have a 3 site setup Site A (10.0.x.0) is the hub with a VPN to site B(10.0.y.0) and PtP t1 to Site C (10.0.z.0) for the time being I am allowing or at least I think I'm...

I'm positive the IP address, line configs, users, and extn did NOT erase\default. I have since erased the config and manually retyped all the configs because I didn't want to chance loading a bad backup config.

Anyone have this happen on IPO 406v2 3.2(69) I went to File -> Advanced -> Reboot and when the IPO came backup the Administrator password was defaulted All configs were erased except extension and user. 0 shortcodes, 0 incoming, 0 hunt groups, 0 license, 1 ip route. What caused \ could have...

The settings come from DHCP I have tried hooking up another 4621 with the same result.

No I have 4 other 4621's working just fine.

I have a 4621sw that used to work correctly then all of sudden, after going thru all initializations(it downloads 46xx....txt,xxxx.bin) then just get Discover (IP address of IPO). We are running v3.2.69

Thanks to all who replied. I "fat fingered" a shortcode I was dialing the extn with a short code but was not sending the 4 digit routing code so I guess what was happening was that the Castelle faxpress was waiting the 15 sec for the DID\dtmf tones before sending the carrier connect tone.

More testing if I direct the incoming call directly to the analog port not using a group it does the same thing but seems to be a second or 2 faster..

No queuing is definetly off. I have ICR based on 5 digit DID routing to fax server group which points to User 201 fax which is associated with port 201 the analog port of the IPO. So when I dial the number the system picksup after 1 ring then 14-15sec of dead air then the fax server sends it's...

IP 406v2 3.2.69 I have an incoming call route directing specific DID's to a hunt group I setup to queue inbound faxes to a castelle fax server but it seems that it takes a long time for this transfer to happen. 15 sec or so after the system connects and phone stops ringing., so some fax machine...

Thanks for the feedback I was trying the DTE reset but was not getting any response as a last ditch effort I unplugged everything including handsets but the pc ethernet DTE and power and it finally worked now it seems to be working as expected.

I was reprogramming IP406v2 R3.2.69 I decided to backup and do a factory default to clean out all previous prgramming etc just to have a clean slate. I click the reest button and now I can not reconnect to the ipo I have tried the default IP the programmed IP connection pc directly to IPO with...

It is the default config I changed only the inside IP. I think I'm plugging it in the right port, I'm plugging in to Ether0/1 port 1 on back of ASA

I am installing a new ASA 5505 small office with 13 computers I have programmed and setup firewall everything works fine, now I need to connect a switch to connect the additional 6 computers. The problem is anything plugged into the switch doesn't receive IP from DHCP of ASA when plugged...

Trying to connect Castelle fax press to Avaya IPO 406 v2 3.2(65) I'm receiving 5 digits from the telco I then want to pass 4 of the digits from the DID to the fax press. Tried following the multitech faxfinder setup but it doesn't seem to be working can anyone point me in the right direction or...