Search results for query: *

Nice Tip, thanks John.

Thanks. that was it, out calling works now.

We are trying to integrate OCS with our option 61c. We have a PRI linking the 61C to an audiocodes gateway. Calls inbound to OCS extensions from internal extension and external callers work fine. From OCS, calls to internal extensions work fine. Calling from OCS to external numbers fail. I think...

If that doesn't work and the phones are powered via POE, you can turn off power to each port on the switches. A little more work but do able.

I have a similar issue and not sure how to proceed. These are the d channel messages I get when I have 91 +AreaCode+PhoneNumber or just 1+AreaCode+PhoneNumber. I'm not sure how to check the NCOS on the trunk. These calls are from an AudioCodes to 61C via PRI. Thanks for any help that might be...

When ever we connect a Nortel switch to a cisco switch, the port on the cisco switch get disabled with an error about trunk information seen on a non-trunk port. it we enable bdpu on the cisco the connection comes back up. that is fine for switches I control. I now need to connect to another...

Much thanks, they are getting the main number unless they have to have their number show up.

the last digit of the XXX prefix is a 0, kind of messes things up I'm afraid.

thanks, I wish the last digit of the XXX prefex were a 6 but sadly it is not.

We did something like this once. What we did is have the TN's terminate on one set of patch panels with RJ11 connectors that was next to the cat5e patch panels. We then made up our own patch cables to go from the RJ11 to the RJ45 patch panels. It work well and made moves a snap. Our RJ11 panels...

We had an option 11 and 51 but both are now on a single option 61. Both systems had did's in the 2900's on the option 11 it was a XXX prefix where on the 51 it was a YYY. when we combined the systems, we made the XXX prefix numbers 5 digit extensions by prepending a 6 to the extension so what...

Thanks, I'll look into upgrading, our wss is on 4.1.0.393, the first 2 chars if the wep key are 6e, does just having any hex a-f in either of the first 2 chars count?

When trying to create a wireless service profile that uses wep encryption, the application crashes after putting in the wep keys with the following error: The application has encountered a serious internal problem and may not be able to continue operating correctly. Service Status: The server...

Should be straight forward. First off, I would try and avoid using vlan1 as one of your vlans, It is the default vlan used when no vlans are configured and may cause some issues down the road. on the port that is connected to the cisco switch on the nortel, make sure both vlans are included in...

Hi all, is there a way to limit the numbers of users per access point? We are using a 2380 security switch running wss 4.1.12 with 2330 AP connected. I remember a setting on the 2270 but can't seem to find the anything like it on this system. Thanks Mike

I tried this on KEY 09, here is the TNB REQ: prt TYPE: tnb TN 100 0 0 2 DATE PAGE DES DES MIKE TN 100 0 00 02 VIRTUAL TYPE I2004 CDEN 8D CTYP XDLC CUST 0 NUID NHTN ZONE 000 FDN 2525 TGAR 0 LDN 4 NCOS 5 SGRP 0 RNPG 0 SCI 0 SSU LNRS 16 XLST 0 SCPW CLS UNR FBD WTA LPR MTD FNA HTA TDD HFA...

Thanks John, sorry for the slow response. I tried your solution, but still no good. I tried your entry 5 without one of the "7"'s, that did result in a 10 digit ANI showing to the outside world, just the wrong 10 digits. My delema is that the phones with a 5 digit dn, the last 4 digits map to...

Thanks for the response, this is what we have when I print out the CLID's from LD 21. The numbers have been sanitized. I'm not sure what else you were asking for though. REQ: prt TYPE: clid CUST 0 SIZE 256 RNGE INTL ENTRY 0 HNTN ESA_HLCL ESA_INHN NO ESA_APDN YES HLCL 714111 DIDN...

The system is a Option 61 PBX, we have DID's from 2 exchanges, lets say 714-111 and 714-222. All the did's for the 714-111 map directly to their extension but the 714-222 did's have a 6 prepended to them to map to their internal extension. For example, 714-111-1234 maps to extension 1234 while...