Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with caller id with mixed 4 and 5 digit extensions

Status
Not open for further replies.

mwing

IS-IT--Management
Jan 10, 2007
19
US
The system is a Option 61 PBX, we have DID's from 2 exchanges, lets say 714-111 and 714-222. All the did's for the 714-111 map directly to their extension but the 714-222 did's have a 6 prepended to them to map to their internal extension. For example, 714-111-1234 maps to extension 1234 while 714-222-1234 maps to extension 61234. This all works fine. When calling out, the 714-111-XXXX extension show the correct caller ID, the 714-222-XXXX numbers were showing 714-222-6XXXX for the caller ID. We created a new CLID for these that show the main number for these extensions, 714-222-1000. My question is this, it there any way to strip the prepended 6 from the 5 digit extensions so that the caller ID can show the correct DID?
Thanks
 
haven't ran into that one. seems the that clid entry for the 5 digit dn would need didn yes but with a two digit leading number for nxx. print your clid tables using all 5's for npa's nxx;s, not being in front of my switch ties my hands.. it can be done

john poole
bellsouth business
columbia,sc
 
Thanks for the response, this is what we have when I print out the CLID's from LD 21. The numbers have been sanitized. I'm not sure what else you were asking for though.

REQ: prt
TYPE: clid
CUST 0
SIZE 256
RNGE

INTL

ENTRY 0
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 714111
DIDN YES
HLOC
LSC
CLASS_FMT DN

ENTRY 1
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN NO
HLCL 7142221000
DIDN NO
HLOC
LSC
CLASS_FMT DN

ENTRY 2
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 7142222852
DIDN NO
HLOC
LSC
CLASS_FMT DN

ENTRY 3
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN NO
HLCL 7141112400
DIDN NO
HLOC
LSC
CLASS_FMT DN
 
So the problem is, you cannot use DIDN = yes because your extensions do not match the DID. I think you may be out of luck here, in older releases you could "trick" the system into truncating from the right, but I think that "bug" was fixed. Would be interested to know if anyone has found another way..

 
Code:
ENTRY 0
  HNTN
  ESA_HLCL
  ESA_INHN NO
  ESA_APDN YES
  HLCL 714111
  DIDN YES
  HLOC
  LSC
  CLASS_FMT DN

if i wanted to use 5 digit dn's and didn yes i would change it to read
Code:
ENTRY 10
  HNTN
  ESA_HLCL
  ESA_INHN NO
  ESA_APDN YES
  HLCL 71411
  DIDN YES
  HLOC
  LSC
  CLASS_FMT DN

then make the 5 digit key 1 scr 77777 10.. that assumes that entry 0 is working for your 4 digit did's.. my digit did's are built a little different.
Code:
ENTRY 5
  HNTN 555
  ESA_HLCL
  ESA_INHN NO
  ESA_APDN YES
  HLCL 777
  DIDN YES
  HLOC
  LSC
  CLASS_FMT DN

so for a 5 digit dn i would delete a single 7 from hlcl



john poole
bellsouth business
columbia,sc
 
Thanks John, sorry for the slow response.

I tried your solution, but still no good. I tried your entry 5 without one of the "7"'s, that did result in a 10 digit ANI showing to the outside world, just the wrong 10 digits. My delema is that the phones with a 5 digit dn, the last 4 digits map to the DID, so for DN 61234, the DID would be 714-XXX-1234 while the 4 digit DN's are a direct match for the DID, as in 714-YYY-2345 rings on DN 2345. So for the 5 digit DN's I would like to strip on the left most digit when calling out.

Thanks again
Mike
 
I tried this on KEY 09, here is the TNB
REQ: prt
TYPE: tnb
TN 100 0 0 2
DATE
PAGE
DES

DES MIKE
TN 100 0 00 02 VIRTUAL
TYPE I2004
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
ZONE 000
FDN 2525
TGAR 0
LDN 4
NCOS 5
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST 0
SCPW
CLS UNR FBD WTA LPR MTD FNA HTA TDD HFA CRPD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNIA CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
VOLA VOUD CDMR
CPND_LANG ENG
RCO 0
HUNT 2525
LHK 1
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 2549 0 MARP
CPND
NAME FIRST LAST
XPLN 9
DISPLAY_FMT FIRST,LAST
01 SCR 3549 D MARP
CPND
NAME FIRST LAST
XPLN 9
DISPLAY_FMT FIRST,LAST
02 HOT D 4 2567
03 HOT D 4 2658
04 ADL 16
05 ADL 16
06 COS
07 ADL 16
08 ADL 16
09 SCR 62831 10 MARP
10 ADL 16 2525
11 ADL 16
12
13
14
15
16 MWK 2525
17 TRN
18 AO6
19 CFW 16 2525
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31
DATE 20 JAN 2007

here is the CLID table
ENTRY 0
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 714704
DIDN YES
HLOC
LSC
CLASS_FMT DN

ENTRY 1
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN NO
HLCL 7149402900
DIDN NO
HLOC
LSC
CLASS_FMT DN

ENTRY 2
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 7149402852
DIDN NO
HLOC
LSC
CLASS_FMT DN

ENTRY 3
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN NO
HLCL 7147042400
DIDN NO
HLOC
LSC
CLASS_FMT DN

ENTRY 10
HNTN 714
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 90
DIDN YES
HLOC
LSC
CLASS_FMT DN


Thanks
Mike
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top