Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Steve789

    Replacing The Hard Drive S8300 C LSP

    Mitch, thank you for responding. I should have made mentioned that since the original 8300 wasn't responding, I installed the original hard drive on a spare 8300 board. When doing so and booting the gateway I could not get a ping and that's what lead me to believe the hard drive was corrupt...
  2. Steve789

    Replacing The Hard Drive S8300 C LSP

    I hope someone can help me determine what I'm doing wrong. I had the hard drive go bad on one of our S8300-C LSPs. I found an identical hard dive in good condition, deleted all former partions and information, installed it onto the S8300, booted with an installation CD for CM 3.1.4... The...
  3. Steve789

    SAT Time Out Settings

    Hello: I have a newly installed Aura V6.3 and if left idle for too long, the SAT session closes. Can anyone tell me where I should look to modify this setting? I have a CM 3.1 system as well and I do not have this problem. Any help is appreciated. Steve
  4. Steve789

    Tracert Test Please

    Thank you for testing.
  5. Steve789

    Tracert Test Please

    Can someone do a tracert from a PC to a VOIP phone and let em know the results, please? This is what I'm getting and I'm not sure if it's normal: Tracing route to 192.168.30.28 over a maximum of 30 hops 1 3 ms 2 ms 3 ms 192.168.222.1 2 3 ms 1 ms *...
  6. Steve789

    AA passthru for non-voicemail users

    If I understand your question correctly, you would use the route to xxxx (4-digit ext.) with coverage N (if just ringing to the extension) or with coverage Y (if covering to a coverage path). In the coverage path you can assign hunt group 99 and setup your bulletin board mailbox. Then assign...
  7. Steve789

    Tracert To IP Phone Bouncing

    Has anyone seen this type of results before: Tracing route to 192.168.43.40 over a maximum of 30 hops 1 2 ms 2 ms 3 ms 192.168.222.1 2 16 ms 17 ms 16 ms 192.168.100.111 3 15 ms 15 ms * 192.168.43.40 4 14 ms 14 ms * 192.168.43.40 5...
  8. Steve789

    [b]Removing A Card From A G700[/b]

    Great news! Thank you for your response.
  9. Steve789

    [b]Removing A Card From A G700[/b]

    Yes, I agree. However the question still remains. Is there anything I should be aware of when removing the card, other than shutting down the 8300 and powering down the gateway first? Thanks
  10. Steve789

    Trunk Group Overflows

    Oops! You're right! I didn't read the columns correctly.
  11. Steve789

    [b]Removing A Card From A G700[/b]

    Is this a easy as powering down the system and removing the card? I've already removed translations, but I have a couple errors (MG-DS1 Error 1 & 23)I want to clear. Thanks, Steve789
  12. Steve789

    Trunk Group Overflows

    If you look at your Que Abd column, it shows that outbound callers are being queued and waiting for a line to become available. When outbound callers are queued, they will hear silence and therefore if they don't know they are queued, they are hanging up. This explains both your Grp Ovfl and...
  13. Steve789

    ASA SMTP Settings

    It was the virus scan software. Thanks for the help.
  14. Steve789

    Incoming Call Handling for i800

    ARe you using incoming call handling treatment? I think that's your only option. Just in case: Ch inc tru xx
  15. Steve789

    ASA SMTP Settings

    Hello, I hope someone can help me with this. I having trouble with the SMTP settings in ASA. When I put in the name of my exchange server and test, I get the following error: "Email Cannot Be Sent:Connection aborted locally due to error or timeout" I've tried putting the domain in front of...

Part and Inventory Search

Back
Top