Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

[b]Removing A Card From A G700[/b]

Status
Not open for further replies.

Steve789

IS-IT--Management
Oct 30, 2006
15
US
Is this a easy as powering down the system and removing the card? I've already removed translations, but I have a couple errors (MG-DS1 Error 1 & 23)I want to clear.

Thanks,

Steve789
 
Don't worry.

ds1 is MM710, because when you removed ds1 pri e1/t1 is down, so system will warning and have alarm.

qiavaya^gmail^com
s8700/s8500/s8400/definity/ip-office
 
Yes, I agree. However the question still remains. Is there anything I should be aware of when removing the card, other than shutting down the 8300 and powering down the gateway first?

Thanks



 
Steve789,

Even better, you don't need to shut down the S8300 or the G700. The card is hot swapp so you can just pull the MM710 out.
 
Great news!

Thank you for your response.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top