Search results for query: *

Yes, on latest 8.0(18) its a strange issue because a reboot clears the issue seems as if it were an impedance issue it would be constant as this occurs accross all (6)lines accross both combo cards. I called all six lines individually and all ring no answer yet ringing on my test set.Clears...

OK, will try next time im am on site.

No caller ID is programed for Loop not CLID any other ideas? The problem I see with checking impedance on the lines is a reboot clears up the issue for several days.

New installation of IPO 500V2 8.0 with (2) combo cards, has (6) inservice trunks and (10) digital sets. Incoming trunk route (0) has a destination of Auto Attendant with a rollover of (200)Main. System work perfectly for approx (10) days and then out of nowhere stops directing calls to AA or...

Press the Green call button, then enter the extension number and press the red "hang up button".

Opened a tcket with AVAYAIT. There was an issue with my ID but all clear now.

Try setting the Private and public OLI and Enter the business name under Features "business name". Just a guess as I am unfamiliar with this vendor.

Can you get OLI to work at all?

Where did the Software downloads go ? cannot find it on the Avaya site or is it just me?

still cannot get this to work any ideas?

Have 2 sites with IPO 7.0 with voice networking authcodes in both, need to know how to route all outbound traffic out of site "B" to go out of site "A" PRI circuit. Ive done this many times in Nortel BCM and CS1000 but never in IPO.

I have a customer with a Option61c RLS 4.5 who would like to add VOIP phones to it. My question is can I still purchase a signaling server and keycodes without having to upgrade to the latest RLS?

Try right clicking your mouse and "save target As" I find this works most times on Avaya.

In the properties tab, there is a setting to use previous calls as EWT"something like that". Also check feature 909 and view the status, maybe the EWT are exceeding the 2 and 3 minute thresholds already?

Its probably the building itself, maybe that outlet is on Emergency power conected to a generator?

Im sorry maybe I missed something but why would you want to do what you are propossing in your last post, you have a great CDP dial plan. In either case you need to add destination codes in your routing table and add your site (IP addresses) and codes under Telephony services, Ip trunks. If you...

The 3.6 and 3.7 to 4.0 are different part numbers so it most likely will not work?

try unplugging the phone, wait a few seconds then call the extension, replugin the phone and call again. Worth a try

Reboot!

dont forget to add your IP trunk routing under Telephony services you will need to add your site info there as well.